2. analog
  3. 168226-3976

Classic Ortofon Cartridges: The MC2000 MK II or the MC3000 MK II?

So I have owned quite a few Otofon cartridges over the years, everything from the modest OM cartridges to a couple of Cadenza up to an A90. I typically enjoy Ortofon cartridges.

Now one I have never owned is the MC2000. It seems from a bit of reading I have done that owners of the MC2000 felt it was the most accurate of the Ortofon cartridges, and that releases after it were not its equal.

However, when you look at the MC3000 it has a higher output level that would allow it to work with my Esoteric phono stage. The Esoteric is happy running an MC200 on it which has .09 mV output. but the MC2000 is .05 mV. The MC 3000 MK II is .13 mV from what I find.

Has anyone spent time listening to these classic MC 000 series of Ortofon cartridges? I know there is also a 5000 and 7500, but those seem to be pretty rare.

Regarding the MC2000, I wonder if I use a low mass headshell if I can use it on the Dynavector DV505. I don’t think the mass of the arm in the horizontal plane should affect it, and the vestigial arm can be configured to be an appropriate match for the compliance on this cartridge.

I currently have an MC200u on the arm and its very surprising regarding how good it sounds. Its actually pretty neutral, pretty expressive, but just a bit relaxed in the top end. I certainly enjoy it, but I wonder how these statement cartridges from the classic Ortofon line will sound. These would have been from their long time designer who has now retired, so its a different era of Ortofon versus what their current offerings are. Even though we should acknowledge that the current cartridges use design principals that were developed from this earlier time period and engineering team. 

Thoughts?
neonknight
pindac's avatar
pindac
2,864 posts
 
Recent Adverts
About $1000 will get you owning the complete Set Up
Caveat Emptor Applies to these types of sales. 

I also discovered a recent MC 2000 sale Ad' where a Beryllium Cantilever is in use.
I am using Beryllium Cantilevers on my Ortofon MC Rebuilds and am totally satisfied.
I have another Ortofon MC rebuild lined up to use the Beryllium with a Ogura Vital. 

orutohonn ortofon MC-2000 operation unused goods : Real Yahoo auction salling

Ortofon T-2000 MC step up trafo, silver wiring *reservert * | Hifisentralen
lewm
13,108 posts
 
Who is able to supply a beryllium cantilever these days? I thought beryllium was verboten. Regardless, the MC2000 came with an unusual aluminum cantilever, and it might be best to stick with the OEM cantilever in order to preserve the original SQ, particularly because beryllium and aluminum are so different in their character. However if it sounds good, it is good.
chakster's avatar
chakster
6,144 posts
 
I also discovered a recent MC 2000 sale Ad’ where a Beryllium Cantilever is in use.



1) This is total BS on yahoo, the cantilever transplanted from Audio-Technica cartridge if you can’t see it !

Gold-Plated Beryllium cantilever is Audio-Technica exclussive.

The stylus tip also replaced with glue. This Ortofon MC2000 has been rebuild, stay away from this one! Please do not start this nonsense discussion about rebuild vs. original. The original cantilever on MC2000 is very special aluminum, not just a cheap aluminum junk people can buy today. It’s completely different cantilever and to see it please find a booklet for Ortofon MC2000 and look at the pictures.

Ortofon ST-2000 SUT normally goes for $1500
But for the minty fresh condition Ortofon MC-2000 prepare to pay more (it’s impossible to find NOS).

2) Another sample on Yahoo has BENT CANTILEVER. It’s clearly visible that cantilever bent to one side too much. This is used sample in bad condition. Seller explained that you can’s use headshell, treated holes for screws are damaged. And you have no idea about suspension.

I also discovered a recent MC 2000 sale Ad’ where a Beryllium Cantilever is in use. I am using Beryllium Cantilevers on my Ortofon MC Rebuilds and am totally satisfied. I have another Ortofon MC rebuild lined up to use the Beryllium with a Ogura Vital.


Another Ortofon is another original cartridge and not a Frankenstein made by someone in Japan using cantilever from cheap Audio-Technica cartridge and glued it to the Ortofon MC2000.


neonknight OP
392 posts
 
@chakster 

Yes, this is the problem with a MC2000 or other classic Ortofon. It has to have the OEM cantilever. A diamond can be replaced, Expert Stylus will do this well, although you will have to accept differences between a Paratrace cut and the Replicant 100. How the damping material ages on a classic Ortofon I do not know, that is another point of concern. Sometimes classic audio components just lose the battle with Father Time. 
chakster's avatar
chakster
6,144 posts
 
The question is who is your supplier, you can buy NOS MC2000 only from serious collectors of vintage high-end, and they can honestly describe the condition. My NOS sample is absolutely perfect and fully original, I am so happy to have it in my collection of the best LOMC. Never seen a NOS sample for sale, only hardly used or damaged samples. This is very rare model.

Expert Stylus is nice little company and their Paratrace is nice profile, but the genuine Ortofon MC2000 stylus profile is NOT a Replicant 100.

The stylus profile is "Symmetrical Contact Line Diamond".

The problem why no one can equally retip the stylus tip is its Press-Fit method. Once the diamond is press-fit you can't press-fit another. They can only glue a new tip, but it’s another method.


You should ask our @edgewear about model 7500 and related stuff. 
More to discover