2. analog
  3. 168226-3976

Classic Ortofon Cartridges: The MC2000 MK II or the MC3000 MK II?

So I have owned quite a few Otofon cartridges over the years, everything from the modest OM cartridges to a couple of Cadenza up to an A90. I typically enjoy Ortofon cartridges.

Now one I have never owned is the MC2000. It seems from a bit of reading I have done that owners of the MC2000 felt it was the most accurate of the Ortofon cartridges, and that releases after it were not its equal.

However, when you look at the MC3000 it has a higher output level that would allow it to work with my Esoteric phono stage. The Esoteric is happy running an MC200 on it which has .09 mV output. but the MC2000 is .05 mV. The MC 3000 MK II is .13 mV from what I find.

Has anyone spent time listening to these classic MC 000 series of Ortofon cartridges? I know there is also a 5000 and 7500, but those seem to be pretty rare.

Regarding the MC2000, I wonder if I use a low mass headshell if I can use it on the Dynavector DV505. I don’t think the mass of the arm in the horizontal plane should affect it, and the vestigial arm can be configured to be an appropriate match for the compliance on this cartridge.

I currently have an MC200u on the arm and its very surprising regarding how good it sounds. Its actually pretty neutral, pretty expressive, but just a bit relaxed in the top end. I certainly enjoy it, but I wonder how these statement cartridges from the classic Ortofon line will sound. These would have been from their long time designer who has now retired, so its a different era of Ortofon versus what their current offerings are. Even though we should acknowledge that the current cartridges use design principals that were developed from this earlier time period and engineering team. 

Thoughts?
neonknight
neonknight OP
413 posts
 
@chakster 

Yes, this is the problem with a MC2000 or other classic Ortofon. It has to have the OEM cantilever. A diamond can be replaced, Expert Stylus will do this well, although you will have to accept differences between a Paratrace cut and the Replicant 100. How the damping material ages on a classic Ortofon I do not know, that is another point of concern. Sometimes classic audio components just lose the battle with Father Time. 
chakster's avatar
chakster
6,144 posts
 
The question is who is your supplier, you can buy NOS MC2000 only from serious collectors of vintage high-end, and they can honestly describe the condition. My NOS sample is absolutely perfect and fully original, I am so happy to have it in my collection of the best LOMC. Never seen a NOS sample for sale, only hardly used or damaged samples. This is very rare model.

Expert Stylus is nice little company and their Paratrace is nice profile, but the genuine Ortofon MC2000 stylus profile is NOT a Replicant 100.

The stylus profile is "Symmetrical Contact Line Diamond".

The problem why no one can equally retip the stylus tip is its Press-Fit method. Once the diamond is press-fit you can't press-fit another. They can only glue a new tip, but it’s another method.


You should ask our @edgewear about model 7500 and related stuff. 
pindac's avatar
pindac
2,864 posts
 
Apologies for going off topic and referencing Beryllium.
My advice to express Caveat Emptor for such types of sale adverts seems an appropriate guidance.
chakster's avatar
chakster
6,144 posts
 
It's true that buying any vintage cartridge a buyer must have trained eye :)) 
lewm
13,420 posts
 
In my opinion, the remarkable thing about the MC2000 is that it does use an aluminum cantilever and a line contact stylus.  Neither is really very exotic.  Yet the sound is sublime in either of my two audio systems.  This is evidence that one ought not to judge a cartridge a priori based on the materials of which it is made.

Chakster, You wrote, "The question is who is your supplier, you can buy NOS MC2000 only from serious collectors of vintage high-end, and they can honestly describe the condition. My NOS sample is absolutely perfect and fully original, I am so happy to have it in my collection of the best LOMC. Never seen a NOS sample for sale, only hardly used or damaged samples."  But you MUST have seen an NOS sample for sale at least once; otherwise you wouldn't own one.  My advice is, if you have not already done so, see how it mates with your 4212 current-drive phono stage and report back.  It's not going to give you any of the pleasure of which it is capable while sitting in its OEM box.
More to discover