There us a Worldwide Panic on Availability of Vacuum Tubes
The EHX founder and vacuum tube producer sounds a dire warning over the “digital IC crisis” and the future of valves following a spate of plant closures.
Last week, Electro-Harmonix founder Mike Matthews surprised the world with the company’s plans to harvest energy from the Earth’s magnetosphere. But in the course of explaining his plans to Guitar.com, the pedal pioneer has also sounded an ominous warning about the present and future of amp valve production.
Speaking about what he described as the “digital IC crisis”, Matthews cited the closure of a factory in China putting huge pressure on the New Sensor facility in Russia, which was founded and is owned by Matthews, to supply the global demand for amp valves.
“Currently, there is a worldwide panic on the availability of vacuum tubes,” Matthews wrote. “The big Shuguang factory in China was forced to move… and the Jamona (JJ Electronic) factory in Slovakia that used to have lead times of one month, now has lead times of six months.
“We’re getting bombarded with orders from desperate customers from all over the world. Our tube factory is operating now at 100 percent of capacity, so we cannot produce all the quantities that are demanded. However, we are allocating quantities to many customers so that they can continue to survive.”
Since the development of semiconductor devices in the 1940s and 50s, and their evolution into the transistors and integrated circuit (IC) chips that form the bedrock of almost every electronic device we use today, valves have gradually become a specialist, niche product.
While the vacuum tube was once the beating heart of consumer electronics – from radios and TVs to computers and telephones – the technology was rendered archaic half a century ago. Transistors are more reliable, affordable, compact and energy-efficient.
As a result, the guitar amplifier industry is one of the few that still requires vacuum tubes – so it’s perhaps no wonder that the number of factories actually producing them has been reduced greatly over the last few decades.
The situation is complicated by the fact that many vacuum tube brands are not vacuum tube manufacturers. They source their tubes from a handful of factories from around the world that Matthews referenced above.
For example, Groove Tubes, which you’ll find in Fender amplifiers, sources its tubes from a number of other companies, including Matthews’ New Sensor.
But if the valve has been on the wind-down for over 60 years, why the sudden concern for the availability of tubes going forward?
As Matthews alludes, the big concern is the closure of a major valve-producing factory in Shuguang, China. Matthews claims the factory has been repurposed for more modern technologies and as such, they have had to move.
This is hard to fully verify, but it does seem to have scaled back production enough to spark online rumours about its factory being closed. It would also be no surprise if – with the Shuguang factory seemingly out of the picture – New Sensor and JJ Electronic were struggling to meet demand, especially given the boom in guitar gear sales over the pandemic.
So what does this mean for the future of valve amps? Well, supply and demand means that as long as guitar players want them, someone will keep making them. But like the vinyl revival leaving manufacturers struggling to fulfil demand with so few factories still producing records in a once-thought obsolete format, the industry’s reliance on a few makers to supply everyone with valves is fraught with this sort of danger.
Ultimately, this is likely a perfect storm of increased demand met with a sudden shortage, meaning that while current shortages are problematic for manufacturers, it’s unlikely to impact us long term.
However, it does reflect the precarious position that the guitar industry is in: relying on a few factories to prop up a multi-billion-dollar global industry is less than ideal, and a long-term shortage of tubes could cause prices to rise dramatically, maybe making some makers turn away from valves altogether.
But for the short term, there’s no need to panic. After all, Matthews might be sounding the alarm about the scarcity of valve tubes, but his company has recently brought out the revived Sovtek MIG-50 50-watt all-tube head for less than $700. Valve amps are not going anywhere just yet.
https://guitar.com/news/gear-news/panic-on-availability-of-vacuum-tubes-mike-matthews-future-valve-a...- ...
- 67 posts total
"Harvest energy from the magnetosphere" so guess where the funds from the upcoming "price gouge" will go? Some old films show the very specialized machines and the amount of labor involved making vacuum tubes https://www.youtube.com/watch?v=GDvF89Bh27Y Additionally, the chemicals and metals involved can be toxic, so forget meeting EU or US standards. It's no wonder that this production is supported in places with lax safety standards, a higher skilled labor force and low labor costs like China or Russia. Good QC is also critical. It's very unlikely that this form of production would ever return to the U.S. |
I wish our tube amp users well. My take on the amplification sector, the fly over, is in my review of the Legacy Audio i.V4 Ultra Amplifier at Dagogo.com Imo, it's not going to be much fun in the future for our tube fans. I see this factory announcement as writing on the wall. You did notice the reference to tech shift several times in the article? There are consequences to such shifts that will impinge upon amp makers and owners. Frankly, as a system builder, the article is a moot point to me. My assessment is that holistically some brands/models of class D have already surpassed tube amps as a genre. I do not think it will be long before enough of the audiophile community concurs with their wallets. That's when the real crisis for tube amp makers in HiFi begins. I do not think it will be too long before it will be difficult to sell an obscure (to the public) tube amp. Eventually, you will have trouble giving it away. With the dying off of Baby Boomers, this could be within 3-5 years. From where I sit, it's going class D whether you like it or not. Thankfully, imo, the sound has already been demonstrated to be worth the switch, at least for me and in regard to the i.V4 Ultra. I plan further investigation into other notable class D). Those who prefer what is imo unnaturally syrupy, boomy, bloated sound (or, as they might describe as "full") will have a problem. :( As they used to say, before the era where everyone thinks they are an incontrovertible authority, YMMV. :) |
"Those who prefer what is imo unnaturally syrupy, boomy, bloated sound (or, as they might describe as "full") will have a problem. :(" If the above opinion is meant to be a blanket indictment, of all that vacuum tube circuitry is capable; it reflects a total ignorance of (lack of experience with) the same. So sad! |
rodman99999, It is not an indictment but a conclusion based on 14 years of reviewing a variety of tube amps in comparison in my room to other genres, and with a variety of speaker systems. It is a summary of their performance characteristic when it comes to tonality and precision. It is an assessment based on building hundreds of systems and hearing the range of tonality of tube amps in comparison to SS amps. Obviously, there is a segment of the performance spectrum where they can overlap, given any particular tube vs. SS amp. If there are not general differences in performance, including the preferred tonality of tube pre/amp products sonically as a category of component, then there is no point in owning them, given their worse specs. There, that is as dandy a blanket statement as yours. :) There is, actually, a very big spectrum of sound with tube pre/amps tonally. However, I will correct you in this; it is not typical to achieve as much of the characteristics I mentioned with solid state products. That is why typically hobbyists turn to tubes. It is a matter of how far along the spectrum toward the warm/syrupy end one wishes to go, and if you do not think tube amps linger in that part of the spectrum more so than SS, then - shall I use your put-down - it reflects a total ignorance of, and lack of familiarity with, the same. :) |
- 67 posts total