Infinity Renaissance 90 Piano Black

I did get some Monsoon replacements ordered.  They are shipping out today.  I will keep you posted.  I should be good with these.  thank you 

Alright. I’d be interested in your feedback. I have both versions of monsoon planar drivers and while they aren’t bad, they are very different, frequency response wise to the EMIM driver.  

Doubt those Monsoons will be the same quality or be a slip in replacement especially what Infinity did to the xover to make the Emim work to their satisfaction, that’s not a simple xover.
https://ibb.co/tJdT1bW

Did you dismantle the Emim to see where the voice coil break is, as I outlined, to be fixed with conductive demister paint??
Could even be a dry solder joint on the spade connector lug to the start of the voice coil.
https://i.ebayimg.com/images/g/lXsAAOSw7~9gltvL/s-l1600.jpg

Look at the voice coil difference to the Monsoon, they will be far higher VC impedance than the Emim so the xover will be out all over the place.
http://i.imgur.com/oYvBh8A.jpg?1


Cheers George

Thanks for the feedback George.  They will not slip in.  Going to have to build a back to house them in the original screw holes.  I did dismantle one of the EMIM speakers.  I could not find a break.  I also am not a pro at this.  Quite frankly i am an amateur.  I still am shocked that they both went out at the same time.  That seemed odd.  I hooked another speaker up to the wires leads and it worked so i think that rules out the crossover.  I am going to send one of the speakers off to have the diaphragm rebuilt.  Hopefully that can happen.   

If you know how to use an ohm meter you will find the crack, it will be fine because you can't see it you say, and just a blob of that conductive paint across the crack should fix them nicely.

Cheers George