TEKTON IMPACT MONITORS

As I mentioned long ago, certain makers are covered with the invisibility cloak by the Admin here. If you missed that, wake up!

True…but that cloak can be pierced with a simple tool called screen capture. i am sure that the misguided libel threat was captured by somebody.

 The new modern world comes with a body cam. Ask any “ Karen after the racist rant at Target. They are always so surprised…

like i said, i relish discovery on this subject. By deleting the thread, the threat “ this isn’t over “ hangs over many. Hopefully the powers that be at Audiogon understand the obligation for preservation of evidence in a threatened legal action.

 Or they could publish a retraction from the hot head who made it.

@tomic601: Years ago Danny designed a 2 cu.ft. (I believe) sealed sub enclosure employing double walls, with the chamber between the two filled with sand. I designed my 4 cu.ft. sub enclosures for the Rythmik F15HP DIY Kit using that same idea (with a 1/2" space between walls), provided my cabinet maker with the schematics, and had him cut the panels out of high quality MDF. I made the braces out of Baltic Birch ply.

I ended up abandoning the idea, having realized that at the low frequencies handled by a sub it is wall stiffness that is important, and robust bracing (spaced 4" apart) is enough to achieve that objective. At bass frequencies, the pressure created inside the enclosure by woofer excursion causes the walls to expand and collapse (like inflating and deflating a balloon), the source of sub enclosure resonance.

The unsupported 4" expanse of MDF wall between braces does create a small amount of resonance , but at a frequency high enough above the range handled by the sub to not be a problem. MDF is heavy, a double-walled enclosure measuring 24" tall x 24" deep x 18" wide and filled with sand really heavy, so having a single-wall/no sand enclosure was welcomed by me!

Coffee (or drinks) sounds great, let me know when you'll be passing through Portland. Have you been to Music Millennium? Pretty darn good LP inventory. 

1) Was any time spent listening to
your loudspeakers? If so, what was the reaction?

Yes, actually on both days my speakers were given a generous amount of time to listen to. My wife actually proclaimed that after listening to Tracy Chapman on vinyl it was the best sound she'd ever heard.
I will admit when we got outside I was angry at her blanket statement and asked her if it sounded better than a live full piece orchestra at the Wagner Noel Performing Arts Center? She said it was her favourite reproduction of Tracy Chapman she'd heard and she's no audiophile and I must say,
the Tekton Moabs with his turntable and valve amp did sound very good, lively, and enjoyable.

I have a pair of speakers designed by an unknown Australian legend, using composite materials, HD3 from New Zealand which is 1.6 times denser than MDF and waterproof (used by the Australian government as public toilet walls, because it is very resilient against vandalism), a birchwood plywood baffle brace on the tweeter end of the baffle. It also has 4mm sprung steel plates laminated on the inside, with both cast iron rods and silicone filled hard drawn copper rods as side wall bracing.

On the second day, my Lenehan Audio ML2 were connected to the Raven amp and his record player, and we got some time on that. I asked him if I could leave his amp in, and Jeff Smith from Silversmith Audio let me use his RCA development cables to connect my digital front end in. To be clear, I did not design these speakers, I build them from components while I was working at Lenehan Audio, building for them. I do have a reasonably good understanding of the technologies involved, and can readily discuss them.

Fidelium cables - Jeff said that the cables would make a difference with hours on them or not, they had maybe three days before bouncing across America to Washington. Jeff himself wasn't too worried about the hours, it seemed his geometry, materials and design worked without needing hours to settle in, and it did sound very clean and the sound was sharp and fast.

2) Was any time spent listening to the Moabs without the distributed bass array, so visitors could get an idea of the Tektons without bass augmentation?

I don't recall so, and the first day I did use the bass array with my diminutive stand mounts in his much larger room. There's simply no way my pair of 6.5" bass drivers supported by a port were ever going to energise a room of that size, with any sort of authority. Any cabin gain that is realised in an appropriately sized listening room for my speakers certainly wasn't going to work here. They are tiny but mighty, just not a large room solution.

The array in my perspective did not hurt the overall presentation, and yet, I will admit I didn't get to hear it without DBA though. Honestly though, I had no problem with the mc sound, perhaps as another had stated it wasn't the critical listening regime that a reviewer would make over months of assessment, we had a weekend to have a listen, get impressions and it was supposed to be fun - not work.

A totally funny moment was when Mike Levine (oh and when I do get time, I'd like to write about our visit to his place) went to place the back of his hand on Chuck's Moabs to discern the cabinet's involvement in the overall sound. Though he was gentle (this guy by the way is a totally classy bloke) the speaker did yield with compliance at his hand gesture, he quickly reacted to try and stop it toppling over, but as he did put his hands either side to attempt to cradle the large speaker, it rocked back the other way. And so he was moving back and forth, exactly in tune with the rocking of the speaker. The room burst with laughter, nothing was harmed, and Mike was a totally good sport about it - yes speakers on good sprung isolation are compliant to the touch, which is a major reason it works so well actually.
Welcome to the wacky world of Townshend Audio, springs and such!

The Focals - They were traded in, I will have to ask for the actual model though. Mike ran a sweeping white noise signal through them, and I heard multiple nodes where the cabinet rang out. This is absolute high end audiophile testing, this is not to say they don't sound good or present well. These are $16k speakers in Australia, with from what I recall, good reviews as well. I'm not here to disrespect Focal owners, just conveying my experience. The Focals were traded in twice, the second owner bought Lenehan Audio ML5. I will get back with the model, soon as I ask my old employer.