How to repair bottom diaphragm connection of Eminent Technology LFT8 planar speakers

I would like to try repairing the connection first to see if this works.

Should work fine with the conductive paint as there's no movement there, different story if it was on the middle of the panel where's there lots of movement
I fixed some ML ESL's with the same problem using the conductive paint worked fine never gave any trouble after that.

Cheers George

If I'm seeing what I'm seeing, the middle contact doesn't just hit the END of the trace. LOOK close it touches the trace on both sides too.

I'm wondering if the insulation was stripped away or added. I'd be looking and either re insulate or clean before your repair. I don't see a problem as long as the traces don't tough where they're not suppose to and DO where they did before..

Way to many great glues for that to ever come apart and if you did want to take it back apart glue it with silicone. At least that won't come apart and adds great vibration and heat control.. Silicone is good stuff.

High temp silicone is conductive clear is not.. Not all silicones are pure.

Thermally conductive is different to electrically conductive🤦‍♂️