Capacitor

👍

Dear gentlemans : Seriously and in good shape. Next item is a trusty " best boutique cap, it's the boutique cap of the caps " to enhance any room system MUSIC enjoyment and with several advantages over any an all those caps and permits that you tailored the MUSIC natural color you want it and with very low added distortion levels.

It comes not from a new comer manufacturer but from an experienced one, with high engineering levels, excellent QC and the item has very high quality performance.

We can't go wrong with:


https://www.klarkteknik.com/product.html?modelCode=P0ACA

here its specs in page 6:

chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/viewer.html?pdfurl=https%3A%2F%2Fmediadl.musictribe.com%2Fmedia%2Fsys_master%2Fh6c%2Fhaf%2F8847686893598.pdf&clen=6221900&chunk=true


In the past I owned items coming from this manufacturer and I will buy again.


Have fun and be truly happy.


R.


@audioman58  I had for 3-4 months a Coda amplifier and are really good, unfortunatelly a manufacturer with low profile but very good one.

Technical Specifications Inputs Type Electronically balanced (pin 2 hot) Impedance 20 kΩ Maximum input level +22 dBu Outputs Type Electronically balanced (pin 2 hot) Minimum load impedance 600 Ω Source impedance <60 Ω Maximum output level +22 dBu into >2 kΩ Performance Frequency response ±0.5 dBu 20 Hz - 20 kHz relative to signal at 1 kHz EQ out ±0.5 dBu EQ in (flat) ±0.5 dBu Distortion (THD+N) < 0.003% @ 1 kHz +4 dBu Dynamic range >114 dB (20 Hz - 20 kHz unweighted, ±12 dB range) Overload indicator +20 dBu Gain control -∞ to +6 dBu Equalisation 30 Bands Centrefrequencies To BS EN ISO 266:1997 25 Hz-20 kHz, 1/3 octave tolerance ±5% Maximum boost/cut ±12 dB, ±6 dB High pass filter slope 12 dB/octave Low pass filter slope 12 dB/octave Notch filterattenuation >17 dB Notch filter response Q=32 Terminations Audio 3-pin XLR and 6-pin Phoenix-style Power 3-pin IEC Power Requirements Voltage 100 to 240 VAC, 50 to 60 Hz Consumption <60 W Dimensions Width 483 mm (19.0") Depth 228 mm (9.0") Height 133 mm (5.2") Weight Net 5.8 kg (12.8 lbs) Options Input and output balancing transforme.

The overall advantage with the Klark TekniK item or similar ones is that we have de control of that " tailored " kind of quality performance and we are not at out of control an at random like with the boutique combination caps.

In that regards there is nothing that can does the caps for we can have the control we are in the caps " hands ". Now,  our items in the audio systems  already came with caps ( that makes it's technical job. ) and  the eq. path is for fine tunning that audio room/system: advantages are to many to name it here but just " think about ".

R.

I have been doing capacitor upgrades for some time now i,especially coupling capacitors in dacs, preamplifiers 
and loudspeakers . The best capacitor for detail  is without question the VH audio CUTF  -Copper foil Teflon it only goes up to 
2 uf I believe , as a main Cap ,my best combination is
for main cap Jupiter Waxed paper Copper foil ,which inside a amp is good to at least 160+ degrees ,no more bees wax. Use  up to 3% of the VH audio CUTF bypass capacitors , they are pretty expensive and room in m any cases is an issue ,I just installed this in my Coda CSIB integrated , and helped a friend in his Loudspeaker this is better then the Duelund cast  capacitors 
at much lower cost they do need a solid 400 hours to fully open up 
But a fantastic combination ,and my preamplifier now is in another league sounding . If you email me I can send you a couple pics to show scale,size.