Fun indeed! Yes, playing devil’s advocate can get one in trouble. My wife always tells me I like to be contrarian. Much in the sound of “A” told me that it should be the MC, but still…… Thanks, Halcro. Interesting as always.
Hear my Cartridges....🎶
Many Forums have a 'Show your Turntables' Thread or 'Show your Cartridges' Thread but that's just 'eye-candy'.... These days, it's possible to see and HEAR your turntables/arms and cartridges via YouTube videos.
Peter Breuninger does it on his AV Showrooms Site and Michael Fremer does it with high-res digital files made from his analogue front ends.
Now Fremer claims that the 'sound' on his high-res digital files captures the complex, ephemeral nuances and differences that he hears directly from the analogue equipment in his room.
That may well be....when he plays it through the rest of his high-end setup 😎
But when I play his files through my humble iMac speakers or even worse.....my iPad speakers.....they sound no more convincing than the YouTube videos produced by Breuninger.
Of course YouTube videos struggle to capture 'soundstage' (side to side and front to back) and obviously can't reproduce the effects of the lowest octaves out of subwoofers.....but.....they can sometimes give a reasonably accurate IMPRESSION of the overall sound of a system.
With that in mind.....see if any of you can distinguish the differences between some of my vintage (and modern) cartridges.
VICTOR X1
This cartridge is the pinnacle of the Victor MM designs and has a Shibata stylus on a beryllium cantilever. Almost impossible to find these days with its original Victor stylus assembly but if you are lucky enough to do so.....be prepared to pay over US$1000.....🤪
VICTOR 4MD-X1
This cartridge is down the ladder from the X1 but still has a Shibata stylus (don't know if the cantilever is beryllium?)
This cartridge was designed for 4-Channel reproduction and so has a wide frequency response 10Hz-60KHz.
Easier to find than the X1 but a lot cheaper (I got this one for US$130).
AUDIO TECHNICA AT ML180 OCC
Top of the line MM cartridge from Audio Technica with Microline Stylus on Gold-Plated Boron Tube cantilever.
Expensive if you can find one....think US$1000.
I will be interested if people can hear any differences in these three vintage MM cartridges....
Then I might post some vintage MMs against vintage and MODERN LOMC cartridges.....🤗
Peter Breuninger does it on his AV Showrooms Site and Michael Fremer does it with high-res digital files made from his analogue front ends.
Now Fremer claims that the 'sound' on his high-res digital files captures the complex, ephemeral nuances and differences that he hears directly from the analogue equipment in his room.
That may well be....when he plays it through the rest of his high-end setup 😎
But when I play his files through my humble iMac speakers or even worse.....my iPad speakers.....they sound no more convincing than the YouTube videos produced by Breuninger.
Of course YouTube videos struggle to capture 'soundstage' (side to side and front to back) and obviously can't reproduce the effects of the lowest octaves out of subwoofers.....but.....they can sometimes give a reasonably accurate IMPRESSION of the overall sound of a system.
With that in mind.....see if any of you can distinguish the differences between some of my vintage (and modern) cartridges.
VICTOR X1
This cartridge is the pinnacle of the Victor MM designs and has a Shibata stylus on a beryllium cantilever. Almost impossible to find these days with its original Victor stylus assembly but if you are lucky enough to do so.....be prepared to pay over US$1000.....🤪
VICTOR 4MD-X1
This cartridge is down the ladder from the X1 but still has a Shibata stylus (don't know if the cantilever is beryllium?)
This cartridge was designed for 4-Channel reproduction and so has a wide frequency response 10Hz-60KHz.
Easier to find than the X1 but a lot cheaper (I got this one for US$130).
AUDIO TECHNICA AT ML180 OCC
Top of the line MM cartridge from Audio Technica with Microline Stylus on Gold-Plated Boron Tube cantilever.
Expensive if you can find one....think US$1000.
I will be interested if people can hear any differences in these three vintage MM cartridges....
Then I might post some vintage MMs against vintage and MODERN LOMC cartridges.....🤗
- ...
- 628 posts total
Thanks for the advice @dover re the Glanz MFG 610LX. As you suggest.....I find mine to be PARTICULARLY sensitive to all the parameters of set-up, although that may be exacerbated by the fact that I have less than 100 hours playing time on it? I found I was needing to load it at nearly 20 Ohms initially to tame its high-frequency response and I added about 100pf capacitance. This was with a VTF of 1.35Gm...... That is how the YouTube video was recorded. Strangely enough.....the day after posting the video, I was listening to it with some familiar music and it sounded awful 😟 After some adjusting....I increased the VTF to 1.5Gm, changed the loading to 40 Ohms and the Capacitance to 70pf together with subtle changes to VTA. I don't think the adjustments are anyway near final and a lot more playing is obviously required. What is your VTF on the MFG61? |
@halcro Recommended VTF for the MFG61 is 1.5g plus/minus 0.25g. From memory initally I started at 1.7 due to the age of the cartridge - my rational is that the suspension can stiffen up with age ( or collapse - which will result in a low rider ) and therefore to avoid mistracking I start at the higher end ( I do this with new cartridges as well ). Then once I am happy it is running well and tracking well, after running in I'll lower the tracking force. I'm pretty sure I ended up around 1.6gm. Dont forget when you adjust VTF you change the VTA, and it needs adjusting. For correct tracking force I use "feel" rather than frequency response - in other words at what VTF does the cartridge sound like its tracking securely but not slugged ( too heavy ). When you say 40ohms loading - do you mean 40k ? I would suggest stick to 47k. This is the recommended load ( for 61 ) Do you have the specs for the 610 ?? I'm curious to know whether the cartrdiges are the same. |
@dover Yes....20k Ohms and 40k Ohms...... Unfortunately my Glanz came without box or specs. I seem to recall that some Poster on A’Gon alerted us to the fact that there was a Seller offloading a handful of these NOS cartridges.... HERE is a close-up of the cantilever/stylus which is the best I can do for you. Any similarities to the MFG61? |
Needless to say, I am very surprised at the sound heard from the Glanz. I will have to go back and search for my reaction to the first time you included it here, Halcro. I don’t remember having a similar reaction. The Glanz is now one of two MM’s heard here that, for me, play with realistic tonal color and no hint of tonal blandness which for me is most important above all else. May I ask which arm/headshell it was mounted on for this most recent shootout? Thanks. |
- 628 posts total