2. speakers
  3. 1333808475

High quality subwoofer - which one?

I’ve owned my C4’s for about six months now, and they are excellent. But, you can’t ask a speaker to things it isn’t big enough to do. What that is, is to go FLAT to 20 Hz. The Vandersteen Quatro’s had built-in 250 watt class B powered subwoofers that are to die for once you hear them. The blemish on the Quatros, and it is a small one, was the slightly veiled lower midrange. The C4’s are absolutely seamless everywhere they go. The lowest bass can be fixed and most would probably say it’s not even necessary...until you hear a real sub system that is. Once you hear the effortlessly smooth low-end of a dedicated sub woofer you just can’t forget about it.

I started looking at subwoofers, and they are expensive, but relative to what this hobby’s cost(s) can be on some item(s), they are affordable. Well, ONE is affordable, anyway. I have three models that seem to all be nice products, and was curious what the feet on the street have used and your likes / dislikes. One model that I have not included needs an external hi-pass filter and I may be dismissing this model out of hand…and shouldn’t be and if you use this model, convince me.

I have a pretty large room (16’ wide x 40’ long x 8.5’ high (ceiling is split at 7.5’ and 9’)) so a bigger sub may be needed. Right now, I’m thinking ONE sub crossed-over pretty low. The C4’s do go pretty deep, but I probably agree that two would be “best” but expensive and the narrower room might make double placement hard. One is a snap, between the speakers away from the wall or near the right corner. I do not play “loud” (80-85 dB SPL average based on my radio shack SPL meter) but still like the smooth deep bass of a sub. Crazy loud isn’t the issue, but the sound quality is.

The choices are mind boggling in cost (JL Audio in mono or stereo) or mono (VELODYNE DD15+) verses stereo (SVS PB13 Ultra) set-ups at the same price. I have three options below to illustrate this.

The set-up that seems too expensive but outrageously good;
JL Audio Fathom f113 - $3600.00 / 13” / 2500 watts peak class D amplifier / sealed box.
But the sub needs a high-pass Cross-over like a Bryston 10B-STD @ $3,500.00

This is expensive compared to the SVS, but is it better than TWO SVS units?
Velodyne DD15 Plus - $4,000.00 / 15.0” / 1250 watt continuous class D amplifier / sealed box.

This seems like a good price but is the product good enough even if the price is? Use TWO of these in place of one DD15 Plus?
SVS PB13-Ultra - $2,000.00 / 13.5” / 1000 watts continuous class D / ported box.

So what have we done with subwoofers and why? This got real complicated real fast. Ported, vented, stereo at the same price as a mono sub ETC. The odds of auditioning these monsters are about zero as you hear the room. My room seems to be pretty good down low based on my Quatro set-up with powered subs. If a decision isn’t easy, I’m missing something…a lot of something’s it turns out.
rower30
halcro's avatar
halcro
2,664 posts
 
Rower,
Your last posting on the single Paradigm sub seems to contradict your valid (IMO) penultimate conclusion on the benefits of multiple subs does it not?
Having lived with a single REL Stadium II subwoofer in my system for 10 years (running full range and high-passed)......and now having had the two Vandersteen 2Wq subs for five years.......I would never go back to a single sub. Nor to REL unfortunately.
I would second Marty's approval for the pair of DD 12s.
Your analysis and reasoning skills appear quite impressive to me :^)
Good luck.
halcro's avatar
halcro
2,664 posts
 
This article by Richard Hardesty convinced me to buy the Vandersteens
2Wq
Regardless of the brand of subwoofer......this is quite a valuable article IMHO.
johnnyb53
3,510 posts
 
I've heard and implemented a fair number of subs with both stereo and 5- and 7-channel surround. I have four subs active in my house right now and implemented two different subs over time on my neighbor's 2.1 system.

Based on the subs I've heard, if you can afford the JL f113, get it! Bear in mind that as good as a single JL sub is, two are better. I heard a setup of Maggie 20.1s flanked by a pair of JL F212s and the integration is seamless.

If you're doing 2.1, especially with something that can handle the dynamics and power handling of your Dynaudios, don't obsess over sending a high pass signal to the Dynaudios. You will get a smoother, more musical blend if you simply let them run full-range and use the sub(s) to fill out the bottom octave with the sub crossover set at 30-50 Hz depending on the speakers' capabilities and the room's acoustics. The C4s spec down to 27 Hz and power handling is rated at 400 watts. They're big boys designed to handle full-range signal even if they don't give you all the sub-30 Hz output you're looking for. When you're adding a sub to mini-satellites with 4-1/2" woofers, a high pass filter makes some sense, but for C4 floorstanders, not so much.

In home theater I *do* use high pass to the surrounds, but that is for handling the dynamic range of effects soundtracks--explosions, crashes, etc. For a musical blend, you're better off not adding yet one more network filter to the signal sent to your mains.

Given SVS's 45-day eval/return period and one-year full-credit upgrade program, you might want to start with a pair of SVS's and see if they give you what you want. One nice thing about the SVS's you're looking at is that you can choose any one of four different low end rolloff profiles depending on whether you leave all three ports open or use the supplied plugs to stop one, two, or all three ports. You may find that plugging all ports gives you a smoother low end curve and more ultimate extension for music.

I have a friend who uses the sealed compact SVS with his Maggies and he's very pleased with it.
erndog's avatar
erndog
261 posts
 
This is a very interesting thread because I'm also dealing with similar issues, so the information here is valuable.

Let me throw in my 2 cents. I have Tyler Acoustic Linbrook speakers w/bass modules and I've measured their response in my room to go as low as 35-40 hz. I also have a JL Audio Fathom 10" sub. I ended up contacting JL Audio tech support to get more detailed information about setting the sub up for optimal performance. I was told by Barry that playing speakers full range and crossing the sub at the lowest octave would result in mish mash. He indicated that the best way to do it is to cross the sub at 80 hz using an external crossover, thus freeing up the main speakers. He said to conceptually treat the sub and mains as a two-way system. The sub being one way and everything else the other way. That leaves the Bryston that was mentioned earlier as a key component, albeit an expensive one. Barry also put a plug into his own external crossover he is developing for half the price as the Bryston, but it's not avail yet. Here is his website that explains more about getting a sub dialed in: http://www.soundoctor.com/whitepapers/subs.htm

One more thing, if I had to do it over again, I would have gotten the 12 or 13" Fathom instead of the 10". The 10" doesn't have enough muscle for some of the powerful classical music I listen to.
rower30 OP
211 posts
 
Halcro,

Yes! That's exactly why I want to go stereo. Remember that the article was done in 2000, and Digital Room Correction was not really available at all. So the room was really making a Vandersteen subs a variety of different products in each room!

WHY he has not updated the subs too include digital or manual EQ like he has in the Quatro, 5A and model 7 is beyond me. Yes, yes, yes this is a great sub EXCEPT you can't get near what you need in room EQ compared to today’s EQ'ed products that can be set-up "right".

It seems that the JL Audio and Velodyne are all CLASS A rated by many sources. The Velodyne offers far more flexibility in set-up. True, it is like a road map, the only roads that matter are the ones you end up using (and it may be the full range set-up road with no high pass!) I can contrast and compare both methods with the Velodyne.

But yes, the SOUND is so hard to argue, I haven't heard anything. My Quatro was great (but it was EQ'ed to my room!!) so the Vandersteen sub is out of date to even his current knowledge.

And yes, the C4 is flat to about 45Hz in a real room, yet it has "response" to 27 Hz without doubling. It is NOT nearly strong enough (flat) down real low to hold nearly the dynamics of a powered sub system let alone be FLAT at 25 Hz! This is reality. And, any driver playing lower midrange with large cone excursions will have a LOT more intermodulation distortion, this is also a reality.

The good news is, DRC has allowed users to set-up subs to properly sound the bass, very much unlike the old days.

So if I KNEW the roads on the map I need (full range and blended subs verses the high-pass option) it would open-up or remove choices. As big a pain as this is, I'd rather error on the side of choices, which seems to be the Velodyne. And yes, this is all metal arithmetic right now...drat it!
More to discover