Sell the 1.7's and buy a used pair of 3.7's; much less work overall and the 3.7 is a far better transducer in every respect. The 3.7's will sound 'smoother' than the 1.7, have better bass and mid-range magic, and are better intergrated; the panels and ribbon speak with a single voice. Also, try increasing the angle a bit by raising the rear and tilting the panels forward slightly, this will help to shelve-down the high end.
Magnepan 1.7 crossover capacitor improvement?
In my never ending quest to eliminate "glare" from all components I've recently realized that my MG 1.7's are a contributor. The crossover caps in them are nothing to write home about, a mixture of non descript caps including an Axon totaling 116.8uf in the mid range and an additional 10uf Axon for the tweeter. Since Axon is basically Solens which does have glare issues, I'm ready to move on. After snooping aroud it sounds like a mixture of Clarity ESA series/ 250V + Mundorf supreme replacements in the mid range and Mundorf Supreme for the tweeter would be a good choice. But i'm curious if someone here has already trod this path and found a different path thats reasonably affordable ( not Duelends and Vcaps...grin)
At this point I have glare about 95% tamed but there are still certain CD passages that cause that chalk board scraping sensation.
At this point I have glare about 95% tamed but there are still certain CD passages that cause that chalk board scraping sensation.
- ...
- 35 posts total
- 35 posts total