2. misc-audio
  3. 169932-104649

Fuses

I’ve read of views on whether amp fuses impart any sound quality or coloring. I had a recent experience that has made me re-think my views (fuses do not affect sound) and wondered if others had a similar experience. 
I have a Line Magnetic integrated amp. After heavy regular use for over 5 years, one day it just wouldn’t power up. After checking the power supply, I assumed it must be a blown fuse. I recalled that Line Magnetic sent with the amp two replacement fuses of the same type/quality that was pre-installed. I dug out one of them from storage, replaced the fuse and the amp powered up normally. 

What surprised and delighted me was the change in sound with the replacement fuse. Fuller bass, more detail and more warmth. I have rolled the tubes several times in the amp, and am attuned to the subtle changes that can make. Popping in a fresh fuse seems to have had a similar affect. And these appear to be cheap fuses, available for a few dollars at most. I don’t think I understand any of this. 
bmcbrad
georgehifi's avatar
georgehifi
10,312 posts
 
amtprod12 posts
georgehifi thank you for the info! I was -just- about to ask someone with electrical circuit engineering/design formal knowledge to explain how a fuse in audio equipment works, is used, and what/how it could flavor the sonic quality of the other components in the piece of kit.

Yes things do change the sound "IN" a piece of kit on the dc side of things.
But an ac mains fuse is not "IN" the piece of kit it’s in the ac mains supply just like like the fuse in your fuse box.
If you truly believe that a $$$$$ ac mains fuse of your amp can be better than a standard one, then no fuse at all would be the best, correct???
Then use one of these in place of your fuse for just a test instead of spending $$$ on snake oil fuses, and see what it sounds like compared to the normal fuse, as it’s solid brass fuse buss bar just like no fuse at all for tech testing. https://ibb.co/KqV3hNb

Cheers George
yuviarora's avatar
yuviarora
537 posts
 
George you are an ideologue.
You are talking to people that have already done all the experiments.
The best fuse is no fuse, we already know this, but most equipment does not allow for the installation of breakers (and breakers also have their issues)
There are space constraints, it’s much easier to just use a treated fuse, that gets you nearly all the way to the benefits of a bypass.

amtprod's avatar
amtprod
102 posts
 
Then use one of these in place of your fuse for just a test instead of spending $$$ on snake oil fuses, and see what it sounds like compared to the normal fuse, as it’s solid brass fuse buss bar just like no fuse at all for tech testing.
georgehifi UGH!~!! But, what about the atom structure and purity of the brass?!?! Is it directional?!?!? Do you need to clean it weekly and coat in some special secret sauce?!?! (Just teasing). I can see making a pretty penny on making some different brass buss bars! OCC copper, titanium, adamantium, unobtanium, hand forged, cold treated, etc.

I wish science and technology could discover a way to measure and catalogue the tint/hue changes each components makes. I worked in professional photography for years with most of it using large format chrome film. It was ’easy’ to measure and know exactly what the tone, tint, color, hue and contrast changes a piece of film would have by the chemistry used to make the film, temp and time kept in storage to age, etc. But electronics man.....a watt isn’t simply a watt!

Post removed 
yuviarora's avatar
yuviarora
537 posts
 
Good luck with your brass rods. 
I am finished with this conversation as well.
Thank you
More to discover