TL074's better, new ones are 20v/us. AD827's maybe better, but I'm using LM6172's which are 3000v/us. Not available in quads I don't believe, but you can modify circuit to accommodate.
TL074 vs.TL084?
Hello!
It seems that many people ask that the difference between TL074 and TL084.
In my opinion, They're all general-purpose operational amplifiers with JFET input. TL074 has a reduced input noise density of 18nV/Hz at 1kHz, compared to TL074. Other aspects are essentially the same, and if noise requirements aren't high, they can be immediately replaced.
But, this opinion I got referred to the comparison article below which I have seen before.
Welcome for more discussions.
All the best !
Tips: https://www.utmel.com/components/tl074-op-amp-pinout-datasheet-and-tl074-vs-tl084?id=845
- ...
- 6 posts total
Take a look at these, depending on your application. LT1364 - Dual and Quad 70MHz, 1000V/µs Op Amps (mouser.com) |
Forgot the TLO74/84 was a quad, the AD827’s don’t come as quad, but this quad OPA2604 is still better. A little colored though just like the TL’s big warmish bass. https://www.digikey.com/htmldatasheets/production/3362271/0/0/1/opa2604.html
And yes as fiesta say this LT1365 would be the better choice, for being uncolored. Andy https://www.analog.com/media/en/technical-documentation/data-sheets/13645fa.pdf |
- 6 posts total