Magnepan MG1.7 fuse question


I have placed an order for a pair of 1.7s. I want to upgrade the fuses but I don't know what spec is shown on the back place for the fuse. One person thought the spec was for a 4amp but I thought that seemed high. Could someone please let me know what the amp size it is. I assume it's a fast blow. Any help would be appreciated.
5560
5560, I found upgrading fuses on my 3.7's from stock to Audio Magic LA fuses was well worth it. I can't tell you what amperage the 1.7 uses. I would wait until you get the speakers at which point you will be able to tell what amperage to replace them with. They will be fast blo fuses. I also found getting rid of those nasty stock jumpers to be very worthwile. Both of these tweeks resulted in an immediately noticable reduction in grain.
Post removed 
This is from the 1.7 manual:

The terminal plate states a maximum fuse value of 4 amps Type 3AG ("normal" or "fast blow"). The bass section
does not require fusing protection. This fuse value should never be increased or bypassed. Do not use slow-blow
fuses. BURNED OUT TWEETERS ARE NOT COVERED UNDER THE WARRANTY.
I remember that burned tweeters not covered and You make a good point to install the correct fuses.
Thanks