PSB Speaker Components For Sale

Jonheal, in all honesty, if you have any need for loudspeakers, your suggestion will provide you with the best return on investment.

The only thing I would think about is to evaluate the crossover, and consider simplification of the network. That's especially true if you have interest in tube amplification.

Around the same time that you bought your pair, while I quit my job and returned to school, I used to work at a place that carried PSB speakers. We only kept the Gold i on the floor, however. They were a bear to drive, and most every amplifier one could throw at them would not prove their true worth. I blame the crossover for that, as again, the drivers have been used in very easy to drive loudspeakers by other companies.

...Is it worth to remove crossover and replace by active?

Trelja!! I got a pair of Goldi for 12 years and very happy with it . But i think it's time to bring it up to date . i read your other posts about Goldi 's tweeter upgrade and replaced the metal dome tweeter with softdome tweeter with great result. Thx you very much for that tip.
Now i decided to upgrade the crossover but cant find any info about Goldi schemantic anywhere on the internet. Could you help me with the lastest schematic developtment for the Goldi? Or tell me where i can find it?
Hope to hear from you soon.
Thx !

Thank you for the kind words, Hoang35. I'll try to search for the schematic on the web. If I find it, we should be able to make an assessment.

That would be great Trelja!!
Btw, i looked into my goldi's xover and found these part:
10uf + 1,5uf electrolytic caps (IMHO it's for midrange)
2 x 4uf + 1uf + 0.47uf film caps (crap stuffs btw) for tweeter
4 x 100uf/100vdc electrolytic caps for the big bad woofer
And for the resistors : 3 x 1R3 20w + 2 x 1R8 10w + 1R5 10w ( all craps btw)
And the last piece of puzzle is 3 inductors, i have no idea about their specs but to me they used very cheap stuffs ,18 or 20 gauge magnet wire, should be 12 gauge aircore , rite?
So i'm facing 2 problems here: i cant find any store selling Mills resistor with the same value at 1R3 20w and spec for the inductors.
Any idea guys? Any help would be very appreciated.