Advice needed on MC cartridges


I’ve an Ortofon Black 2M cartridge on my VPI Classic 2 turntable, It’s a moving magnet type cartridge with a Shibata stylus and cost about $700 when purchased. I could easily be wrong, but am under the impression that the Ortofon 2M Black is about as good as it gets with MM cartridges and if I wished to upgrade I’d need to be thinking about moving into a MC, moving coil, type.

So I’ve been trying to learn something about moving coil cartridges and what differences or improvements in sound quality might be obtained by using one. My integrated amp, a Luxman 507uX Mk2, has a built in phono stage and can play either type,

Generally speaking, how much more would need to be spent on a MC cartridge before a noticeable, or significant improvement, might be heard in sound quality over the Ortofon 2M’s performance? What improvements in performance might you obtain using one a better quality MC over the Ortofon 2M Black? And third, what MC cartridges might you recommend that would fit in performance and budget wise with a system composed of the above equipment plus Magico A3 speakers. My other equipment is a Marantz Ruby CD/SACD player and a Shunyata Denali Hydra power conditioner.

I’ve never heard a MC cartridge in use so would be interested in following your advice and recommendations to see if I can find a dealer or someone that might be able to demo one so I can hear what the differences might be in performance. Thank you for any responses or suggestions

Mike

skyscraper

Secretguy, thjanks for the recommendation of the Denon. I’ll add it to the list of cartridges to research.

Jim, Thanks, Do you think it would be detrimental to the physical structure of an MC cartridge, perhaps the needle or cantilever, to have it on a unipivot arm or is it just that it would perform better on a different type arm.

Mjostyn, pardon my ignorance, but what is meant by the "compliance" of a cartridge?  I was starting get the impression to LOMC’s performed better than HOMC's, but since you mention having a compliance factor to consider with a unipivot arm, may send me back to the drawing board.

Thank you for your explanation of what constitutes a gimbal arm and how they work. I’ll look up the arms you mention, along with the nineteen cartridges suggested by everyone so far. Hope i don’t get an additional case of sticker shock. Acclimating to the thought of a possible $3000 MC cartridge purchase is unsettling enough for one day, and I’ve yet to research the MI type cartridges.

Thank you for the education and taking the time to post all the above information . I’ve been learning a lot so far from you and everyone else.

Mike

The arm you have is not going to hurt a better cartridge. AJ Conti the genius behind the Basis Vector arms ( sadly RIP ) IMO probably wrung the best sonics out of a Unipivot. Look, Mijo absolutism aside, many, many audiophiles w unipivots and high end cartridges are quite happy with the musical enjoyment they provide….

But let’s get real, most of the arms Mijo mentions are > $6 K and up….

I did look up the Schroder CB mijostyn owns and it was in that price range you mention. He’s fortunate to have one. Thanks for the reassurance a good quality MC cartridge can work on a unipivot arm. I can save up to upgrade to a pricey cartridge in a reasonable amount of time, but although I'd like to, it’s unlikely I’ll ever be swimming in the deep end of the audiophile pool.

Mike