2. analog
  3. 174956-118236

Advice needed on MC cartridges

I’ve an Ortofon Black 2M cartridge on my VPI Classic 2 turntable, It’s a moving magnet type cartridge with a Shibata stylus and cost about $700 when purchased. I could easily be wrong, but am under the impression that the Ortofon 2M Black is about as good as it gets with MM cartridges and if I wished to upgrade I’d need to be thinking about moving into a MC, moving coil, type.

So I’ve been trying to learn something about moving coil cartridges and what differences or improvements in sound quality might be obtained by using one. My integrated amp, a Luxman 507uX Mk2, has a built in phono stage and can play either type,

Generally speaking, how much more would need to be spent on a MC cartridge before a noticeable, or significant improvement, might be heard in sound quality over the Ortofon 2M’s performance? What improvements in performance might you obtain using one a better quality MC over the Ortofon 2M Black? And third, what MC cartridges might you recommend that would fit in performance and budget wise with a system composed of the above equipment plus Magico A3 speakers. My other equipment is a Marantz Ruby CD/SACD player and a Shunyata Denali Hydra power conditioner.

I’ve never heard a MC cartridge in use so would be interested in following your advice and recommendations to see if I can find a dealer or someone that might be able to demo one so I can hear what the differences might be in performance. Thank you for any responses or suggestions

Mike

skyscraper
Post removed 
skyscraper OP
829 posts
 

Thanks Eric. You're most likely right. I did buy a second hand Shunyata Denali Hydra power conditioner a couple years ago and that's worked out well. Usually I stick with new though. 

Mike

sandthemall
544 posts
 

I just made a jump from MM to MC. I have a Technics 1200g and have been running Audio Technica VM740ML and VM750SH. These are great sounding MM carts that track well and are quiet in the groove.

 

For my foray into MC carts, I intended to go right to the ART 9 but decided that I’d like to travel up the line and start with the AT33PTGII.

I was a little disappointed at first. But I ordered various size mats get the tonearm level and I gotta say, this is a great cart to start with...YIKES! Getting the VTA spot on made this thing come alive.

I now have this cart slightly tail down on thicker 180gram vinyl and dead level on standard vinyl. Can’t wait to try the AT33SA as I’ve heard this has more detail.

Enjoy trying different carts out. And pay special attention to set up.

skyscraper OP
829 posts
 

Sandthemail. Thanks for your response. When I do get a more expensive cartridge I think I’ll get a professional to set up the installation for it this time. I’m a DIY type guy and worked hard at trying to get all the settings correct for the Ortofon 2M Black on my VPI Classic 2, but who knows how well I succeeded. I’d never done this before and had no baseline to know how well or not it was set up when I was finished.

I found an individual about a couple hours away in Charlottesville, Virginia who specializes in VPI turntables and their set up. I’ll be contacting him. It’s impressive you were able to figure out all you did to gets yours to perform as well as you have.

Mike

tommypenngotti's avatar
tommypenngotti
219 posts
 

@skyscraper 

 

So did you ever pick up the Gimbal? Thoughts?

I'm in the decision mode of trading in my Uni Pivot for the 3D Fat Boy Gimbal

Thanks! 

More to discover