Accuphase E-260 Voltage Conversion (100V to 230V)

Hello imhififan,

I got an Accuphase E-270, I also want to covert the voltage, here is the picture

Would you know it the same as E-260 setting and just change the new cable color? Thanks.

Is that to say if I buy luxman cl38uc directly from Japan,we can change the voltage by ourselves to 120V ?

@frankhhh

I believe E-270 basically has the similar connection, Accuphase changed the color code on E-270 primary winding wires from E-260.

Sorry I can’t see the color very clear from your picture, please confirm if the setting shown on your picture is 100V Japan voltage? and also confirm if the colors are correct as following:

Pin 1 = None

Pin 2 = Yellow

Pin 3 = Orange + Black

Pin 4 = Brown

Pin 5 = Blue

Pin 6 = Red + Gray

Pin 7 = None

BTW, below is a picture similar to E-260 primary winding color code, except the blue wire should be violet on E-260.

Once you confirmed which wire belongs to which primary winding by a DMM, voltage conversion should be quite straightforward.

Hello imhififan, 

Thank for your reply, It is 100v setting and right color.  Below picture is more clear. 

Thank a lot.

Thanks @frankhhh for posting the pictures of E-260 and E-270.

If I understand you correctly, E-260 and E-270 primary winding color as follow:

winding on E-260 / E-270

1. 120V orange / yellow

2. 100V red / orange

3. 0V gray / red

4. 120V yellow / brown

5. 100V brown / black

6. 0V white / gray

7. T. fuse violet / blue

If above color code is correct, the voltage settings of E-270 should be as below ( pin numbered from left to right according to provided picture ):

120V setting : pin1 = None, pin2 = orange, pin3 = yellow + brown, pin4 = black, pin5 = blue, pin6 = red + gray

220V setting : pin1 = black, pin2 = yellow, pin3 = orange, pin4 = red + brown, pin5 = blue, pin6 = gray

230/240V setting : pin1 = black, pin2 = orange, pin3 = yellow, pin4 = red + brown, pin5 = blue, pin6 = gray