Accuphase E-260 Voltage Conversion (100V to 230V)

Hello Forum Members,

I have an Accuphase E-260 Int. Amplifier wired for 100V wall outlets. I am trying to convert it to 230V. From various threads on this forum, I could figure out that this unit has quick connect terminals for winding wires. It was less daunting to find that out!
Can somebody pls help with it's 230V wiring diagram?
(attached: existing taps for 100V wiring)

https://drive.google.com/file/d/1NBny4a2HoLRjfVGiasG48A2IoPaIcI_c/view?usp=sharing
https://drive.google.com/file/d/1N3QUV-7IBBPu5Qtk-_gk2Sw4zPJq82Vk/view?usp=sharing

Thank you.
Abhishek

eabhishek10-04-2020 4:05am

frankhhh Details Discussions Posts This discussion Message User 4 posts 03-07-2022 at 05:26am Copy Comment URL Report Comment Edit Delete Hello imhififan, Yes, I think the color mapping should be as detailed as you describe Then I jump to 120v setting and it can work. The output voltage become about 49v(maybe my AC input is only 115v) Thanks for your great help.😄
imhififan Details Discussions Posts This discussion Message User 2,123 posts 03-07-2022 at 06:01am Copy Comment URL Report Comment Edit Delete I'm glad everything worked out fine. 🥂
imhififan Details Discussions Posts This discussion Message User 2,123 posts 03-07-2022 at 05:50pm Copy Comment URL Report Comment Edit Delete @frankhhh As I mentioned, confirm which wire belongs to which primary winding by a DMM! If convert 100V to 220V or 230/240V, you need to 100% sure the resistance between gray wire and blue wire is 0 ohm, use a ohm meter to measure before connect the gray wire to pin6.
frankhhh Details Discussions Posts This discussion Message User 4 posts 03-08-2022 at 09:19am Copy Comment URL Report Comment Edit Delete Hello imhififan, OK, Got it. My current requirement is 120v, thanks for your reminder.
jgore Details Discussions Posts This discussion Message User 5 posts 04-19-2024 at 01:43pm Copy Comment URL Report Comment Edit Delete @imhififan @frankhhh i sent you a direct message. Thanks

🥂