Best Isolation Device for Speakers?

@celtic66 I've read many reports of ATC owners getting positive results with the Gaia footers, so my experience is more of an outlier. The SCM100 towers required the expensive Gaia 1 model and maybe I was just expecting more given all the positive scuttlebutt. The other factor is that I sit fairly close - speakers in roughly a 2.5m triangle with the listening position - and the Gaia do raise the speakers significantly more than the Podiums or the Herbies footers. Perhaps that effected my impression? The Podiums were about 50% more expensive than the Gaia, bought direct from Townshend in the UK.

Worth mentioning again that fine adjustment of speaker position with both the Podiums and the Gaia is a bit of a pain - at least with my fairly heavy speakers. The Herbies made fine adjustment easy. I recommend the Herbies gliders - or some other furniture glider - to establish best speaker position first before installing either the Podiums or the Gaia. 

In my very humble opinion (I in no way claim to be right), I think most of you have ignored the facts that;

1) Speaker designs differ-the best place to start is to confer with the designer when possible. For example, John Devore does not recommend either coupling or decoupling under his O Series speakers. 

2) Many if not most loudspeakers are "voiced" for real world conditions;

3) Rooms and floors differ;

And most importantly of all;

4) There is ultimately no perfect solution to the vibratory nature of pistonic cones. Ricard Vandersteen may think so https://www.vandersteen.com/news/the-truth-about-pistonic-driver-cones but the truth is that his products don't ultimately sound per se better than many other competitive designs. The point being that you can tweak away forever but it won't solve the inherent deficiencies of pistonic drivers. You will hear differences that might strike you subjectively as being "better" in the short term but over substantial time you are unlikely to think that your system is suddenly the nadir of home music reproduction. Granted, there was this guy with 10K posts on this Board who claimed that Townsend products under a certain coffin-shaped cheaply constructed loudspeaker was "perfect sound" but we all know where that got him. 

@fsonicsmith said:

 The point being that you can tweak away forever but it won't solve the inherent deficiencies of pistonic drivers. You will hear differences that might strike you subjectively as being "better" in the short term but over substantial time you are unlikely to think that your system is suddenly the nadir of home music reproduction.

No-one said any of these tweaks will overcome shortcomings of speaker design. My understanding is that that the isolation products allow your speaker to work with less feedback and 'singing along' from the room. It sounds that way, with more low level detail and better imaging/soundstaging among the benefits. As always YMMV.

FWIW I think speaker positioning and some attention to room treatment are more fundamental than these isolation products - though the later can certainly elevate a system where the former have already received due attention. 

My wife sister Mount pair of spring on her tennis sneaker and we all better for that.

BTW @fsonicsmith you have a lovely, carefully assembled system there. I'd be curious what effect some speaker isolation would provide in your setting. Maybe you should try a lower cost option like the Herbies footers - or have you already?