Grounding cable gauge size

@ozzy thanks for the update.  I have a rf router box on order.  Can you provide more detail on how you have it wired to each component/ground box? Is your 7000 only connected to the router wall plug no ground boxes.  Are your speakers connected to the wall plug?  Thanks

tksteingraber,

I have my Entreq Silver Tellus connected to the (source) RCA’s to my Lumin X1 and JL CR-1 Crossover. No preamp is used.

The Entreq then is also connected to my very large DIY ground box (pictures on my systems page) which also connects my subs and amps via banana’s

The Russ Andrews unit is connected to my:

1. Niagara 7000 to a DIY AC plug (with just the ground connected).
2. Connected to my Entreq via Banana
3. Connected to my Lumin X1 chassis ground terminal on the separate power supply.

My speakers are connected to a couple of my DIY ground box(s) for speakers.

ozzy

Yesterday, I disconnected the Russ Andrews unit from the Entreq. I feel the music sounds better with the Russ Andrews unit connected to just my chassis ground. ie; Lumin X1 ground terminal and the AC ground into my Niagara 7000.

ozzy

How’s it sounding now ozzy, noise floor down 2 or 3 db, better bass with more air and definition.

teck

tecknik,

Well I am still experimenting. I have removed the Russ Andrews ground lead to my Niagara 7000. I think the Niagara does more ground clean up by itself.

So, today I have the Russ Andrews unit leads to the chassis of my Lumin X1 power supply and the JL Audio CR-1.

I am still running separate signal grounds from the rca’s on the equipment to my Entreq/ DIY grounding boxes.

ozzy