Cartridge Loading for a phono pre amp


Hello,

I have recently acquired a phono pre amp recommended by Michael Fremer.  It is “THE VINYL”, from QHW audio, Spain.  It got a great review.  I have a Benz Micro Glider rated at 1.1MV.  I have no idea how to set the dip switches for MC Load impedance for this cartridge. The options I have are as follows: 47K, 1K, 560R, 470R, 100R, and 47R.  I have a solid state amp and pre-amp, and also have a sub that I use, rarely.

Any advice would be most appreciated!!

judsauce

I found this thread searching for answers about load impedance on my new turntable and Parasound JC3+ preamp… and while 99% of the conversation/debate here is beyond my interest and understanding I can say that it was helpful in trying a few different things that have resulted in better sound to me.

I have a Pure Fidelity Stratos cart which has an impedance of 45 ohm and recommended loading of 400-500 ohm. I had experiemented with the variable loading on the JC3+ for the past several weeks but always felt like I was missing something. The lower settings (around 100 ohm) seemed smoother yet less dynamic, the higher settings (around 450-500 ohm) seemed more dynamic but harsher overall.

After reading this thread and others linked within I tried the 47K ohm MC setting last night just to see what would happen and lo and behold, it sounds arrestingly better than the recommended loading on my system. A much more wide, expansive soundstage and smoother presentation. Since it was late I didn’t give the bass a workout but I’ll be listening more this evening.

My JC3+ is connected to a Backert Labs Rhythm 1.3 preamp.

Just thought I’d put my .02 in the thread in case there are others like me searching for knowledge in this area. In that it’s not always necessary to follow the manufacturer’s recommendation to get the best sound for your specific system. 

@holmz  : Sorry my ignorance. Could you explain in specific what do you mean with:

 

" the RIAA sort of works in our favour as the stylus does not have to move as far with the curve.."

Thank's in advance,

R.

@rauliruegas What he is referring to is the constant velocity aspect of the cartridge, which is part of the RIAA curve. The faster the stylus moves, the more voltage it puts out. So the RIAA curve rolls off against this characteristic. In fact its often referred to as a 'characteristic curve'.

atmasp, thank's but no.

 

Holmz, now I seen the ? in your statement. So, you are guessing again due that you do not make the tests yet. Nothing wrong with that because it's the way you are, like to " guess " as in your tonearm thread.

I hope that the test LP you bougth will receive soon. The tests on tracking and resonances will stop your " guessing ". Again, nothing wrong with that.

R.