Choosing the right SUT for my setup



I’ve decided to add a SUT to my setup. My MC carts are a Denon 103R (14 ohms/0.25mV) and an Audio Technica AT-OC9XSL (12 ohms/.4mV). I’m trying to decide between two used SUTs: the Denon AU-300LC and the Denon AU-320, both having a 1:10 ratio. Would loading ideal gain for the 103R and the OC9 be best achieved thru a using a calculator and installing a resistor that can be switched for carts or testing with a trimpot then installing resistor? I’ve also seen writeups where the OC9 is put on a 1:12 SUT and 1:20 for the 103R; from the boards experience is that pushing overload, or its in a good spot?

jctyler

I don't really see anything wrong with that Ebay kit, all you really need is a well shielded box with decent RCA connectors. The CM-1254 are shielded in MU metal cans so the metal box is mainly to shield the exposed wires inside.

You might want to contact the Ebay seller that sells the finished chassis for plug in style transformers. He uses the very nice Hammond die cast aluminum chassis. I'm thinking he can sell you a chassis with all the parts and predrilled to mount it all in. Be worth a shot.

 

BillWojo

If building from scratch, I would advise if using RCA Phono Connectors to consider using designs that are Low Eddy on both Cables and Chassis Connectors.

I am still scratching my head, trying to comprehend the science, about the really positive impression made from being demonstrated the effect of these Connector Types vs Standard Types in use recently.

It is enough to make myself believe there is more to be attained from my own system.