finally the long awaited MH-DA005 DAC has arrived.
soon I will publish photos and listening tests
😁
Musetec (LKS) MH-DA005 DAC
@boxer12 "So I've been going through some of you guys posts & have ordered the following:
Really liking the results so far. Hopefully the D-link will be delivered tomorrow. "
How did it go? |
Hey dbb, The D-Link has been hooked up. It's a bigger change to sound quality than the "Fiber cable & switches". However, I suspect that is because they are working very well together. Next step... Going to try a longer fiber cable to eliminate 100' of "generic" cat 6. As far as the DA005, it has approx. 80 hours on it now, so still breaking in. It's a great DAC that I wouldn't have known about without your thread & melm's. Really enjoying it. |
I report the first brief report below, I hope to please: first start up: more than two minutes of loading, DAC setting in line with the manufacturer's recommendations: DPLL BW01, NO DEENPHASIS. first listening: when I switch on the device I detect bad audio quality for at least an hour, as the DAC warms up the quality improves but it is not yet decent (medium frequencies are not very audible); after three hours the three-dimensionality of the sound begins to be built, the soundstage is wide both in width and in depth, the instruments are clearly distinguishable, the medium frequencies are still at a low level. already like this, with only three hours of running in it is already superior to the DAC Topping DX7 Pro ... the sound of the Topping in comparison is completely two-dimensional, it loses depth and the instruments are not as distinguishable. I can't imagine how the MUSETEC can sound after the recommended 200 hours of running in ... I'm full of expectations |
@boxer12 @americanspirit You need to run your system 24hrs on a loop or play an internet radio station with your preamp muted or your poweramp switched off. It’s going to take 500-800 hours or thereabouts to break-in, but it’s really worth it. |