2. misc-audio
  3. 178314-174247

MacIntosh Power Amp: What Power Conditioner Can Handle Peaks?

I'm new to the MA12000 integrated amp, but I live in an area with many thunderstorms, so my low level devices are attached to a Power Conditioner for surge protection and noise rejection.  I have another issue in that my audio room is served by one 15 amp 115v circuit.  The mac is 300W/channel and each subwoofer is 800-1000 w/channel.  So, I would like to at least have the mac draw upon the power conditioners peak power capabilities.  I know that McIntosh suggest that the amp be plugged directly into the wall.

What power conditioners can support the MA12000 and not totally break the bank...any in the $3000-$5000 price range?

vonhelmholtz
vonhelmholtz OP
911 posts
 

Wow..that is impressive.

Do you find an improvement with the power amp plugged into the regenerator vs directly to the wall?  I ask because the other advantage is evening out the power load on the house electrical circuit.

 

juanmanuelfangioii
958 posts
 

Dedicated line to your listening room. Be done with the gadgets. 

vonhelmholtz OP
911 posts
 

I believe that I would want four lines..a mix of 220 and 120.  It would require over 100 feet of buried power cables to reach my second garage and then probably add 220 to garage for future electric vehicle..but I prefer V8s..so I'm guessing a secondary panel in the finished double garage.  My listening room is above the double garage.  How do I educate myself as to how to do this for audio?  I'm pretty sure that the easiest approach preferred by the electrician is not the best approach.  I bet the EMF from the electric car recharger would be pretty wicked.

vonhelmholtz OP
911 posts
 

Thank you all for you input.  Have since read that multiple dedicated lines are tricky and can have unintended issues.  I opted for a Shunyata conditioner as my initial step.

More to discover