Dunlavy SC4 Speakers

The measurement is from ear to speaker, not from ear to center of the triangle baseline. You can have the listening position directly in front of the opposing wall, if, and only if you have an appropriate amount of absorptive material directly behind the listening position. I suggest you do some measurements before moving everything around.

Thanks Unsound. I will do some more measurements. if I set them 10ft. apart on the long wall that would then give me
roughly 8.5 to 9ft from ear to speaker wondering if that will be enough to allow the drivers to properly blend?

If you could set them up about 12' apart from center of tweeter to center of tweeter, about 2' from the long wall behind them, that would be even better. Do remember to toe them in. It appears you might be in the ball park after all. To avoid comb filtering effects, be sure to use absorptive material behind the listening position. Such a setup should even out bass response (typically the biggest challenge) and help imaging.

The drivers are matched well enough you can go more than 12' without losing anything. Toe the speakers in so you can only see a sliver of the inside of the cabinet. Lose the spikes and don't bother with bi-wiring.

2cj, in spite of the well-meaning advice from myself and others here, you must have the patience for experimenting in your own set up.

Any recommendations for specific dimensions must be considered only as recommendations for your list of trials. There are simple too many variations in room dimensions, construction, treatments, associated equipment, and personal taste for any of us to tell you "exactly" how to set up your speakers.

I believe you will continue to find your speakers to be very revealing, therefore they may benefit from even small adjustments.

Good luck and have fun.