Thiel Owners

tomthiel

I understand. Back in those days many Modders had their own upgrades for Sony ES spinners.  Only a few would place a Seal of Certification on the rear panel. Still, you will want to hold on to this critical piece of Thiel Audio history.  Continue to enjoy CD playback while looking forward on a modern player or transport with SACD capabilities.

Happy Listening! 

Well guys I am selling my 3.6 and classe. I found I was getting the same bass at a better listening level on the pcs vs the louder level needed to achieve this with my 3.6. Along with a soundstage and clarity that’s just as good. Midrange is slightly lacking but I think the trade off is worth it. Until a 3.7 or 7.2 pops up or thiel makes loudspeakers again; I’ll be sticking with my pcs.

Jim thiel pcs is the best bookshelf I’ve heard I think.

These are insane. How do bookshelf speakers sound like floor standing speakers.

thoft - Jim's MO was to design each model to its full potential. In the case of small speakers, the trade-off was how deep the bass goes. Yours are about 50Hz anechoic, possibly deeper in your room. The PCS gets a big boost by having the 4" midrange to fill the mid frequencies both on and off axis, while not adding the expense of another crossover circuit - that’s significant.

The PCS debuted in 2000 using the first generation coax developed for 1998’s CS2.3. The PCS sold about 2000 pair, at the low end for a Thiel model.

I heard that Jim was working on a CS7.3 in which he hoped to develop a next-generation coax using the RadialWave or StarPlane diaphragm with a next-gen mechanical coupling and rare earth motor like the CS2.3 and 2.4. That driver could have a smaller, lower mass midrange diaphragm than the 3.7 which has to interface with a 10" woofer. That new coax would have been used in his 2.7 and PCS2. After Jim's death Thiel Audio had developed a StarPlane CS1.7 woofer, which would have been upsized from 6.5" to 8" for the CS2 series.

In New Thiel’s (2013) first year with Steve DeFuria and Bob Brown onboard, they started working on these drivers, but found it beyond their depth to bring the designs to light.