Speaker Spikes - do the shake test


Everyone by now knows that speaker spikes improve the sound. The theory is that the tweeter excursion is so short, that any speaker cabinet front to back movement creates Doppler / intermodulation distortion. That movement can exceeed, by many times, the excursion of the tweeter. So, the effect is most pronounced up top and then towards the bottom most frequencies. Or so they say.

I have some C4 series II speakers that come with four “spikes” in the plinths. But, the people in Denmark seem to think we all have hardwood floors. The so-called spikes are dull “lugs" that really are meant to sit into four small aluminum floor bot dots, for any better term for them. Many have speakers on carpet, and the so-called spikes sitting on those four round aluminum discs still are pretty wobbly on carpet.

Last week, I pulled all eight of the spikes (not nearly sharp enough, with a 30 degree rounded tip, to be called a spike) and had the guys in the machine shop at work lath them to 60-degree POINTS!

OK, re-installed and speakers leveled (four point level is a pain). WOW, now they are stable as a rock when you push and tug on them. What was NOT expected, was that the BASS response is significantly better. Not that bass is easy to do, but the contribution to the C4’s bass that spikes that are now planted into the concrete floor and under the carpet is amazing. The bass can now place a black dot on a white background as needed. Everything isn’t a shade of gray in the bass. I always felt that the C4’s weakness was bass definition, but the weakness is that Dynaudio doesn’t supply two sets of spikes, those for hard surfaces and those for carpet. That’s too bad, as the supplied spikes don’t cut it on carpet. My spikes are now good enough to pierce down below the carpet and rest on the concrete. But, real spikes should be like half-inch ten-penny nails that don’t chew-up the carper as much as my 60-degree spikes. But, I can’t find this spikes for the C4’s.

If you are like me and haven’t given your speakers the shake test, go do it! If they wobble around any at all see what you can do to fix it. The rewards are well worth as close to free upgrade as I’ve ever done. Don’t think for a second that it seems, “good enough”. If they move around, it isn’t.
rower30
Yes, the engineers I've known are utterly responsible for ruining pop music as we know it. Bastards! But then I don't listen to much pop music...
Wolf, No, you are not the only anti-spiker. Sometimes I spike and sometimes I don't. It depends on the situation. I do whatever it takes to get the best sound, but I know spiking is not always the answer as some folks believe.
Hello Ketchup,

Per your request for information, we spoke with the owners of our footer experiment and were granted the right to publish some of the criterion in order to further understanding in audio. Please keep in mind that this test was an original concept to further the knowledge of the staff and to increase the quality of sound in our facility. At the time of the test the company had no intentions for the commercial sale or use from the assessment.

Test Criterion:

Day s: 10, average one hour per day electronics metering with each footer system, approximately two hours per day listening session per each footer system. The results from electronic testing were combined with listening sessions where each individual took notes on performance. The totals of participating products were reduced to a top three finalists in each category. The final three days of testing varied on listening time where the top three products were switched in and out and without regard for time requirements to insure mechanical break in period.

Electronic Test Data: RTA and SPL

Sets of Human Ears: 3

Footer Requirements: Floor born speaker systems Pair #1 ¼”-20 threading, Pair #2 6M-1.0 threading, compact monitors were tested with non threaded products placed between speaker cabinet and steel stand top only (floor spikes on monitor stands never changed).

Price Range: $25.00 to $100.00 per single cone or device, products were chosen by staff with bias placed on manufacture 30-60 day return guarantees. Products were also selected based on positive Audiogon forum feedback and reviews, longevity in service and reputation of the manufacturer. Products were purchased without the manufacturer’s knowledge of impending experiment and seven companies were represented.

Control Room:

Mixer - Microphone channel input s were calibrated and never changed, channel output faders were set for optimum house mix (varied slightly), all EQ and Processing throughout the chain were bypassed (never changed).

Amplifiers: Three stereo same make and model of amplifiers were dedicated as one amplifier per paired speaker system, amplifier outputs were run at full open. Amplifiers were rack mounted in ATA flight cases and rested on the flooring; speaker wire length varied slightly between pairs. Amplifiers remained ‘turned on’ and signal was passed without interruption throughout testing period.

Prerecorded Instruments Chosen: Channel 1 – Piano, Channel 2 – French horn, Channel 3 – Cello, Channel 4 – Acoustic Guitar, Channel 5– Electric Guitar, Channel 6 – Bass Guitar, Channel 7 – Kick Drum, Channel 8 – Snare, Channel 9 – Hi-Hat, Channel 10 – Over Head Ride Cymbal, Channel 11 – Synthesizer, Channel 12 – Male Vocal, Channel 13 – Female Vocal, Channel 14 – Female Vocal

Instrument Room:

Loudspeaker Placement: Away from all wall surfaces centrally located left and right from center, speaker placement did not change over test period

Microphone and Stand Placement: Mic 1 near field three feet off flooring (never moved), mic 2 distanced at a six foot height (never moved).

Speakers: For fairness, each speaker was allotted a 24 hour period ‘post part installation’ with constant feed of current passed through providing an equal time period electronic and mechanical break in for each product.

Human Listening Test Protocol: Testing was conducted involving individual instruments, combinations thereof with a focus on routine progression for each product. Eliminations were based on feel, emotion and overall audible presentation with crossover analogies from electronic documentation. Listening tests were first procured in studio control room. The top three finalists testing included both the control center and reviews in the instrument suite where the loudspeakers and amplifiers were located.

We will respond to any questions provided we do not breech our Agreement from the sale of this result. Product name branding is strictly prohibited.

There were no First, Second or Third Place product awards given here. The results provided us a higher level of understanding sonic differences between isolation (decoupling) and energy movement (direct coupling) processes. We state that the direct coupling method and products were chosen for our studio applications.
The entire test noted above was not performed in my house with my ears, and thus is rendered useless, especially since it didn't test my speakers or any other floorstanding speakers on wood floors using vibrapods. Also, the text of the post was clearly written by a robot.