2. analog
  3. 180549-7338

TW Acustic Raven AC Owners with 3-4 arms

I have a Raven AC  with (2) arms on the two back posts, the second arm was simple enough to add but I want to add a 3rd arm to the front right post which is above one of the (3) footers. How do you get the cap off? The cap screws/unscrews in either direction for a few turns but then stops. Do I need to break the table down completely to get the cap and footer off? Seems like it should be so simple but I obviously don't want to break my table either.

Any TW owners with 3-4 arms have any advice/insight?

Thanks,

Earl

3090
pcosta
241 posts
 

You must remove the bottom corresponding section that holds the footer,  then the top section will unthread from the plinth.

 

3090 OP
24 posts
 

Pcosta,

Thanks a ton for the quick response. But how do I do that if the table is sitting on my rack? Do I need to take off the (2) arms and the platter first?

Earl

pcosta
241 posts
 

No need in my experience. Find a few soft cover books or fold a towel on top of a hard cover book to protect the plinth from scratching and lift the front of the table put the books under the front high enough to unthread the side you want.

3090 OP
24 posts
 

Got it, thanks again!

pcosta
241 posts
 

Enjoy

More to discover