They definitely do and probably more than any other cable, then power cables, interconnects and digital cables the least. At least that’s my opinion. If you can’t hear the difference in your system then you should probably start with upgrading your speakers first.
- ...
- 168 posts total
They certainly can do so. I recently replaced long runs (6m) of thick (6sqmm) van Damme cables with Neotech NES 3002 cables Big price difference. The Neotech are made of OCC copper and have multiple thin cables in much better insulation. The result was that good recordings sound much better: more detail and better sound stage. Bright recordings now sound a bit too bright but can be tamed inexpensively with a Schiit Loki. Here's a link: https://wp.neotechcable.com/up-occ-copper-cable/ As far as I understand (not very far really) one factor explaining the difference is the difference in skin effect between one thick cable and lots of little ones which together have the same volume as the thick one. |
Yep …. Need proof? The next time you attend a hifi show, take a moment to look behind the systems in your favorite manufacturers’ rooms. You’ll notice that the cables they choose to use when they’re trying to make a good impression are not the standard cheap or middlin’ cables. They only use very top end premium OEM brands - and only the very top OEM brand models - to showcase their components in the best light possible.
|
Repost AUDIO: SPEAKER CABLES - From Alan Shaw (owner and designer of HARBETH) ” … So, the moral of the story is this: the most important factor of the loudspeaker cable that you should select is the amount of metal in the cable core. More metal means lower resistance. If the core is round (as most are) then the correlation is simple: the fatter the diameter of the metal core the better because the electrical resistance between amp and speaker will be lower. Thin and really thin cores should be avoided regardless of how exotic the metal material is claimed as the lack of metal in the core conductor will increase resistance. That will reduce amplifier damping, effect the frequency response of the speaker and give unpredictable results that will vary from amp/speaker combination. |
- 168 posts total