"One practical consideration is you really need a very short, low capacitance run of cable from SUT to phono stage." Which is a good reason for having a high quality SUT built in to the phono circuit, on board.
SUT - electrical theory and practical experience
Some vinyl users use a SUT to enhance the signal of the MC cartridge so that it can be used in the MM input of a phono stage. Although I don't understand the theory behind it, I realize that a SUT should be matched individually to a particular cartridge, depending on the internal impedance of the MC, among other things.
Assuming an appropriately / ideally matched SUT and MC, What are the inherent advantages or disadvantages of inserting a SUT after the MC in the audio chain? Does the SUT theoretically enhance or degrade the sound quality? What does the SUT actually do to the sound quality?
Thanks.
- ...
- 298 posts total
Dear @mulveling : " I’ve found a good SUT will be quieter than a good JFET stage "
Only true reason for that is that your JFET unit is a mediocre overall design.
Btw, "" rich, meaty, weighty. ""
typical " audiophile/tube " adjectives that means nothing about MUSIC, specially live MUSIC seated at near field position that’s where the recording microphones are positioned. Your statement means that you like sound full of developed COLORATIONS/DISTORTIONS.
R.
R. |
@lewm - That’s somewhat true. It’s an advantage to be onboard in the phono stage box. However, I have LL1931 built into my VAC Renaissance SE (another phono stage I own) and my preference for different SUTs greatly overrides the advantages of being onboard. I also have an outboard K&K SUT box with LL1931Ag (i.e. I’ve tried LL1931 both onboard and outboard), so I know it’s really the LL1931 sound that I don’t like. Being onboard reduces the chances you’ll have a grounding hum issue. And of course it eliminates the chore of picking a transparent IC. But once you know you need a low capacitance short run IC, it’s pretty easy to find a "transparent enough" cable. For me, the ability to choose a SUT to my preference is by far the dominant factor over issues with IC’s or grounding. I’ve yet to be super-impressed with an onboard SUT. |
@rauliruegas - and I'm OK with that 😁 |
- 298 posts total