Darrens, Absolutely there are plenty of people with these machines who report zero problems- as the reply from the Rega distributer may indicate. However I had 3 Apollo machines and a Saturn machine over a nearly 2 year period and every single one exhibited various combinations of the issues above. That is my own personal experience, so I am not jumping to conclusions. It has been suggested by a Rega dealer over on audioasylum that my problems and that of doug shroeder (who had 5 machines and none worked correctly) are related to RFI, and goes on to say that it is essentially just 2 guys that have problems with these machines. That theory does not hold water for me because my 3rd Apollo and my Saturn worked largely without incidnet for several months, and then started bugging out. Additionally doug shroeder had a malfucntion at an entirely different location when he took his machine to his dealer. Further I have knowledge of 3 other users that had errors on more than one Apollo machine. In total my count stands at 20 faulty machines among 8 different users. These errors include all of the known software bug issues on some of the machines, and the drop out/skip problem on others. The drop out issue is probably due to an explanation listed above. The machine sets itself to one of 3 error correction levels during initialization, and there are instances where it chooses a lower level of error correction for slightly scratched/marred discs which proves to be inadequate and causes the audio drop outs, or the "acoustic feedback" skips mentioned by a dealer above. I myself did not have drop outs, but 2 other posters above did. Other than disc initialiaztion failures and the drop out thing, most other problems are related to track access via the remote and the failure to respond to stop function and these will not be experienced by users who play entire discs. Initialization failures are in the range of about one of every 15 or 20 discs.
