2. amps-preamps
  3. 176422-76351

Peachtree GaN 1 Beta

Before I start my post here is my current system for reference:

Auarlic Aries G1 --> Denafrips Terminator or SW1X DAC --> Audio GD HE1 XLR preamp or Sachs preamp --> various tube amps --> Cube Nenuphar Mini's w/ a pair of REL S510 subs. Cables and power conditioning commensurate with the rest of the system.

__________________________________________________________________

As warmer months approach I have been looking for a cool running amp to replace my Line Magnetic LM-518 and other tube amps for a few months as they run pretty hot.

I've been interested in the GaN FET amps and just purchased a used LSA Voyager 350 Gan FET amp which I should receive in a few days. I've tried class D amps before and while they checked a lot of boxes I just didn't feel drawn in. However, I like to explore so I figured I'd try the GanFET and since the amp has zero feedback and my speakers seem to prefer amps with little or no feedback I figured it be worth checking out.

Today, Peachtree Audio sent out an email inviting users to a beta of their new Gan 1 amp. Here are some excerpts from their email:

 

What is the GaN 1?

In basic terms it is a 200 Watts-Per-Channel (WPC) Power Amplifier designed to be the sole interface between your digital audio device with a variable output, like a Bluesound NODE, and your speakers. The GaN 1 is a simple, pure and cost-effective audio solution: connect the GaN 1 to a streamer and a pair of speakers and you have an amazing Hi-Fi system. That's it...no DAC, no preamp and no input switching. The signal path from the music to your speakers is remarkably short and free of artifacts. Want to hear the intricate details in your music that have always been there, but you couldn't quite make them all out before? Then the GaN 1 is for you!

What makes the GaN 1 so special?

First and foremost is the GaN-FET amplifier module. It has several inherent advantages in a power amplifier that even the best MOS-FET designs simply cannot achieve. A GaN-FET power stage provides a precise high-power reproduction of the Class-D PWM signal with extremely high linearity. This linearity eliminates the need for ANY feedback, ultimately allowing for the best possible audio quality providing clean, clear middle and high frequencies and a tight, solid reproduction of low frequencies. GaN-FETs track the complex audio waveforms MUCH more accurately than MOS-FETs, resulting in significantly more transparent and natural sound. The difference is something even a casual listener can hear and appreciate. The GaN 1 is also designed so that it does NOT require a digital-to-analog-converter (DAC). The digital audio signal at the input directs the amplifier outputs to drive the speakers. Although DACs have continued to improve over the years, there is no DAC better than NO DAC! This concept is not new as similar devices known as "Power DACs" made quite a splash in our industry years ago. But this time around, by executing the concept with GaN-FETs, the bar is raised to an entirely new level.

Key Features at a Glance:
▪ 200 WPC state-of-the-art GaN-FET module
▪ ZERO feedback design
▪ Regulated 450-Watt power supply
▪ Coaxial S/PDIF input with native support up to 24-bit / 192kHz
▪ DAC-less design
▪ Power on/off trigger port
▪ All aluminum chassis
▪ No cooling fans

 

This sounded really interesting to me and since I have a good streamer I signed up for the amp beta only. One aspect that intrigues me is to create an extremely minimal signal path. My speakers are single driver, crossover-less design. Employing the GaN 1 will mean the system will be Auralic Aries --> GaN 1 --> Cube Nenuphar Mini's. Will that lead to a more engaging sound vs the full system? Will the Voyager GaN 350 outperform a tube amp in the full system? Who knows, should be fun to find out....

Now, I have no idea how either of these GaN FET amps will work with my speakers. The Cube Nenuphars seem to prefer amps with low damping and no negative feedback, which is more common with SET tube amps and Class A solid state amps. I'm not sure of the damping factor of the GaN FET amps, but both are Zero feedback designs, and both have way more wattage than I need. For reference, I have a 1.5 wpc 45 tube amp that sounds amazing with the Cubes, so high wattage is not required. I am interested though in what these amps will sound like compared to my tube amps, and I am particularly interested in what the streamer direct to amp Peachtree will sound like.

I am also looking to acquire a First Watt SIT-3, which is a great match with the Cubes, but now that they are no longer produced prices have gone above my current comfort level. If I can get one I will throw it into the experiment.

The Peachtree won't be shipped until sometime in June, or possibly later. In the meantime I will get the LSA Voyager in the next few days. I might even be able to get it hooked up this weekend so stay tuned, should be an interesting experiment...
abd1
ricevs
1,543 posts
 

A stock GaN1 amp is really good.....but there are so many ways to make it better:

1. Eliminate the junk AC/Fuse connector and use a Furutech inlet......The better inlet and removal off the fuse will sound much better. You don’t need two fuses: one on the power supply and one on the outside of the amp....one bad fuse is bad enough....two is worse.

2. Changing the AC input wire to the power supply with seriously good sounding larger gauge wire......better sound again.

3. Changing the fuse on the power supply to an audiophle fuse for better sound again.

4. Change the output wire to better sounding wire and hardwire at both ends....(no push on connectors).

5. Change the output jacks to the better sounding WBT nextgens.....or even better to my plastic clamp goodies (you cannot use bananas with my plastic clamps...only spades and bare wire). Clampng using plastic hardware (all metals....even as a clamp...wreck the sound) is really the same as hardwiring. You are clamping the wire coming from the output wire from the amp board directly to your spade or bare wire on your speaker wire. I will be ordering the plastic parts soon and have the clamps available for people to use on any amp and/or speakers. The plastic wing nutted clamps will be mounted on painted wood (either as a single pair for mono use....or two sets for stereo use). This is the worlds best connector....better than silver binding posts or anything else you can think of........same sound as soldering the wires together.

6. Change the spdif input wire to way better sounding wire (hardwire at both ends....no connectors).

7. Try removing the "extra" inductor on the speaker wires.

8. Change and or modify the output filter caps on the amp board.

9 Damp certain parts.

10. Shield certain parts.

11. etc. to infinity.

So, if it is this good now.......OMG.......you are in for a treat.

Down the road, completely different power supplies can be tried...Even linear supplies......fun times ahead.

donnylovely
105 posts
 

What about coupling caps? 

ricevs
1,543 posts
 

There are no normal coupling caps in a digital amp.....just the filter caps to ground on the output.  However, sometimes on an spdif input there will be a tiny .1uf coupling cap to block DC.......we will see if there is one in the GaN1.....if so, I will certainly upgrade it.

yyzsantabarbara
4,890 posts
 

@ricevs If you want the amp, I can send it up to you. If you get back to me before 4PM I can send it today. However, I am going to stick with the SR1a for the GAN1 and not my 2-channel gear. I am going to setup the fibre steaming in my family room tonight and I am not going to move that stuff back up to the office to test 2-channel.

*************************************************

One thing I did not mention in my rambling post from 3AM was the 3 amps that worked well with the SR1, the CODA #8, Parasound A21+, and KRELL DUO 175XD, all had the benefit for being connected to the CODA 07x preamp. This preamp is definitely warm and considered tube-like. I also had the smooth Musetec 005 in that chain. So that setup was geared towards warmth and smoothness. The GAN1 is sort of naked compared to the other amps.

 

ricevs
1,543 posts
 

Sure, send me the amp.  I am just now ordering an IFI Zenstream and will mostly be listening to files through a usb stick plugged into the back of the IFI.....Especially want to hear my 24/192 download of Tea for the Tillerman that was transferred from the master tape using the $30K ADC from MSB.......

More to discover