2. amps-preamps
  3. 176422-76351

Peachtree GaN 1 Beta

Before I start my post here is my current system for reference:

Auarlic Aries G1 --> Denafrips Terminator or SW1X DAC --> Audio GD HE1 XLR preamp or Sachs preamp --> various tube amps --> Cube Nenuphar Mini's w/ a pair of REL S510 subs. Cables and power conditioning commensurate with the rest of the system.

__________________________________________________________________

As warmer months approach I have been looking for a cool running amp to replace my Line Magnetic LM-518 and other tube amps for a few months as they run pretty hot.

I've been interested in the GaN FET amps and just purchased a used LSA Voyager 350 Gan FET amp which I should receive in a few days. I've tried class D amps before and while they checked a lot of boxes I just didn't feel drawn in. However, I like to explore so I figured I'd try the GanFET and since the amp has zero feedback and my speakers seem to prefer amps with little or no feedback I figured it be worth checking out.

Today, Peachtree Audio sent out an email inviting users to a beta of their new Gan 1 amp. Here are some excerpts from their email:

 

What is the GaN 1?

In basic terms it is a 200 Watts-Per-Channel (WPC) Power Amplifier designed to be the sole interface between your digital audio device with a variable output, like a Bluesound NODE, and your speakers. The GaN 1 is a simple, pure and cost-effective audio solution: connect the GaN 1 to a streamer and a pair of speakers and you have an amazing Hi-Fi system. That's it...no DAC, no preamp and no input switching. The signal path from the music to your speakers is remarkably short and free of artifacts. Want to hear the intricate details in your music that have always been there, but you couldn't quite make them all out before? Then the GaN 1 is for you!

What makes the GaN 1 so special?

First and foremost is the GaN-FET amplifier module. It has several inherent advantages in a power amplifier that even the best MOS-FET designs simply cannot achieve. A GaN-FET power stage provides a precise high-power reproduction of the Class-D PWM signal with extremely high linearity. This linearity eliminates the need for ANY feedback, ultimately allowing for the best possible audio quality providing clean, clear middle and high frequencies and a tight, solid reproduction of low frequencies. GaN-FETs track the complex audio waveforms MUCH more accurately than MOS-FETs, resulting in significantly more transparent and natural sound. The difference is something even a casual listener can hear and appreciate. The GaN 1 is also designed so that it does NOT require a digital-to-analog-converter (DAC). The digital audio signal at the input directs the amplifier outputs to drive the speakers. Although DACs have continued to improve over the years, there is no DAC better than NO DAC! This concept is not new as similar devices known as "Power DACs" made quite a splash in our industry years ago. But this time around, by executing the concept with GaN-FETs, the bar is raised to an entirely new level.

Key Features at a Glance:
▪ 200 WPC state-of-the-art GaN-FET module
▪ ZERO feedback design
▪ Regulated 450-Watt power supply
▪ Coaxial S/PDIF input with native support up to 24-bit / 192kHz
▪ DAC-less design
▪ Power on/off trigger port
▪ All aluminum chassis
▪ No cooling fans

 

This sounded really interesting to me and since I have a good streamer I signed up for the amp beta only. One aspect that intrigues me is to create an extremely minimal signal path. My speakers are single driver, crossover-less design. Employing the GaN 1 will mean the system will be Auralic Aries --> GaN 1 --> Cube Nenuphar Mini's. Will that lead to a more engaging sound vs the full system? Will the Voyager GaN 350 outperform a tube amp in the full system? Who knows, should be fun to find out....

Now, I have no idea how either of these GaN FET amps will work with my speakers. The Cube Nenuphars seem to prefer amps with low damping and no negative feedback, which is more common with SET tube amps and Class A solid state amps. I'm not sure of the damping factor of the GaN FET amps, but both are Zero feedback designs, and both have way more wattage than I need. For reference, I have a 1.5 wpc 45 tube amp that sounds amazing with the Cubes, so high wattage is not required. I am interested though in what these amps will sound like compared to my tube amps, and I am particularly interested in what the streamer direct to amp Peachtree will sound like.

I am also looking to acquire a First Watt SIT-3, which is a great match with the Cubes, but now that they are no longer produced prices have gone above my current comfort level. If I can get one I will throw it into the experiment.

The Peachtree won't be shipped until sometime in June, or possibly later. In the meantime I will get the LSA Voyager in the next few days. I might even be able to get it hooked up this weekend so stay tuned, should be an interesting experiment...
abd1
Post removed 
kuribo
524 posts
 

@arafiq

Exactly.

Many of these "tweaks" have been shot down by amp designers as more likely to degrade performance rather than offer any concrete improvements. Others have been called outright hazardous from a safety standpoint. None have any basis in science. Sure, there are those who make claims that their modded product went to an 11, but as we all (should) know, not only do we not all share subjective taste, our ears are easily influenced by biases. Without any objective data, it’s all sideshow liver pills.

And why we are continuously subjected here in this non-commercial forum to these blatant commercial ads is sickening. This same behavior has resulted in removal from other sites.

Ag insider logo xs@2x
cleeds
5,715 posts
 
kuribo

And why we are continuously subjected here in this non-commercial forum to these blatant commercial ads is sickening.

Perhaps you are visiting the site too frequently if your frustration and sickness is continuous. Perhaps you should take walk in the sunshine. Or, perhaps this group is not for you.

Or, perhaps, you should take your grievances to the moderators directly. You can use the "contact us" link at the bottom of the page. I have found them to be very responsive.

What is it about A'gon that makes you think it's "non-commercial"?

atmasphere's avatar
atmasphere
11,640 posts
 

YOU CANNOT measure the sound of solder, wire, jacks....removing jacks, damping, wire directionality, capacitors, resistor brands, inductor brands, removing noise creating things like fuses and LEDs, adding exotic noise filters, etc, etc. into infinity. 

Actually, a lot of the things in the list above do have measurable effects. The trick is knowing what to measure. In almost any class D circuit, the specs of the resistors, caps and inductors have to be examined to make sure they will work in the circuit. Different brands often have different specs and different ways of presenting them, as well as different models that are not equivalents from line to line. Solder makes a difference too, since poor solderjoints can result in unwanted effects. I can go on but you get the point. 

If the parts/materials do not perform correctly, in a class D amp its a very good bet that noise will be the result. In a GaNFET amp, where the output devices can switch at 60MHz and higher, it might be hard to detect parasitic oscillations (you need a really fast oscilloscope and fancy probes that can cost more than the amp you're working on; just getting the probe near a parasitic can shut it down...)- which can result in the GaNFETs heating up more (not to mention interference with other services like FM broadcast). 

So you can take the quote above with a enormous grain of salt.

jerryg123's avatar
jerryg123
3,429 posts
 

This entire thread has turned into the house of spam. 

More to discover