2. speakers
  3. 179533-156773

Green Mountain Audio

I picked up a set of Diamante's for cheap. They have trashed foam surrounds but otherwise seem fine. I plan on veneering the "marble" with a beautiful teak or rosewood- I haven't decided.The angles will look pretty cool with the right veneer. The marble is not so cool but rigid and heavy. 

Curious if some upgraded drivers would improve the sound- as apposed to re-foaming. I realize this is a shot in the dark but my understanding is Roy from GMA has passed so not sure where to get driver advice. Open to any and all suggestions.

ovinewar1
ovinewar1 OP
91 posts
 

What I would love to do but won’t, is cut the top 4 inches of the speaker off, the obelisk, and make it flat. Veneering those is an absolute bear. I had every finger bandaged from razor cuts on the first one. The reason I didn’t start the second was I am rethinking the process to possibly find an easier but aesthetically attractive approach. 

ovinewar1 OP
91 posts
 

And if anyone else is considering veneering over cultured marble with a variety of angles……… I wouldn’t recommend it. I have found a successful process, but it is a pain. I intentionally have let them set for a few months to see if the adherence is stable. Even the speaker cut-outs have no wiggle room so after veneering them I had to slightly turn down the holding rings by 1/32”

ovinewar1 OP
91 posts
 

Carpathian, if you are curious, I probably would not have been as eager to restore had I even passingly considered  the issues I would be facing. But now that I am in… no quitting. 

thecarpathian's avatar
thecarpathian
4,361 posts
 

That's the spirit!

 

More to discover