Solid core OFC vs stranded OCC copper

Stranded cables are actually made up of tiny solid core wires. Morrow audio stuff (which works fine) illustrate that point sort of, although they claim to be "small coated wires" bundled together...their top of the line "anniversary" speakers cables have 2,304 small wires...now that's some solid core!

I find stranded cables smear the time domain and never provide the attack of a single solid core wire. This applies to both interconnects amd speaker wire.

OCC silver has proved the most lifelike and detailed for interconnects. I tried different wires with same plugs as I make my own cables. My speaker cables are solid core soft silver (bendable and better sound) 4n pure.

Sound stage is holographic, detailed, phase coherent and wonderfully natural and tight.. Never had anything close with even two strands of wire doing the same job.

How good is your hearing?

OK.  So talking speaker cables.  I'm not aware of anyone using solid core cables for speaker cables.  Speaker cables should be at least 12 awg and preferably 10 awg.  That would be very stiff.  

Speaker cables can be made by weaving individual strands of solid core ofc copper into a round braid.  12 strands of 22 gauge is 11awg equivalent so weave 24 strands (half for positive and half for ground) would make a good cable.  I use a very similar speaker cable but each of the woven strands is also stranded.  I am very happy with their performance.

I do use ofc solid braided interconnects.

Jerry

@carlsbad

Audioquest type 4 & 5 is solid core. Both carry two solid red and black cores for bi-wiring. Audioquest states Type 5 is 15 AWG in total.

Stranded speaker cables remind me of the Monster cables I started with in the 90’s, which are still being sold today, albeit they tout "pure copper" today. But why would I go back to that?

I have found that the larger (lower) AWG is better for Power cords. So I am interested to know why that would make a difference in speaker cable runs? My runs are about 20 feet, and a bigger AWG is important for resistance, but I am curious if you have heard a sonic difference with the use of a bigger AWG in your speaker runs? My speakers are Martin Logan motions and go down to 4 ohms.

In the Audioquest world (and I am not sold on any manufacturer) if I was to upgrade to Type 9, I would still get the same 15 AWG solid core wire but with the dielectric-bias (battery), so Audioquest is in not providing a larger core as you go up their product line. As far as I know, 15 AWG is the most copper found in Audioquest speaker wire line, so I have always just surmised that going with a larger copper core will not enhance the sound.

@goodlistening64 I tend to go the other way. I would not try a cable that was only 15 awg.

That said, it would probably be fine on low power systems or systems with an active bass driver.

Edit to add:  I am intrigued by a speaker cable that is stiff enough to stay where you put it rather than lay where it wants to lay.  Audioquest has a free in home trial.  My system is using less that one watt per channel....maybe I should consider it.

Jerry