Integrating HT and 2-channel systems


I've now got separate HT/AV and 2-channel systems located back-to-back in a large-ish room (ca. 12 x 32 ft). I'll soon be moving to a substantially smaller space and the "media room" will shrink to 12 x 17 ft, basically what I have cut in half. Something has to give and I'm struggling with how to put it all together. Here's what I've got to work with:

1. HT/AV 5.1 system: 80" TV, Denon AVR-x3600 HT amp, Maggie MMG's*, Maggie MMG C center spkr, Velodyne ULD-12 subwoofer*, Boston acoustics rear spkrs


2. 2-Channel system: Shiit Frey S preamp, DAC and other line level stuff, ML No. 332 amp*.  Everything is connected in balanced mode, no RCA's.  For speakers I've got Maggies IIIa's* and KEF LS-50's to play with in addition to the above.
* FWIW, the old stuff is working perfectly - recapped, factory refurbished, rebuilt etc. I'm not keen on getting new stuff, want to use what I got if at all possible.

As it is, I'm quite happy with both systems. The MG IIIA + ML 332 is quite magical and I don't want to lose that. The AV system is also all really need. But I really don't see the best way to make one system out of 2. At this point my thinking is:

> For 2-chan: Same setup as now - Schiit front end, ML 332, IIIa's.

> For AV:.For front speakers feed ML 332 with AVR-x3600 using unbalanced/RCA inputs?  Obviously other surround speakers just fed by the x3600.
 

Can the ML 332 live with both inputs connected at once?  Obviously I'd have to take great care not to use both at the same time.  Any better suggestions or ideas? Thanks in advance,

128x128kletter1mann

Sorry, your lack of punctuation and typos makes your response quite unclear.  Are you suggesting setting SPL every time I go from 2-chan to HT?  And what's wrong with using both inputs on 332 to AVOID having to set SPL all the time?

What about an RCA/XLR audio switching box? You can switch which system you send a signal to.

 

@kota1  Thanks, I did think of that but hoped to find a more elegant solution.  But in the meantime I realized that I already had a more elegant answer staring me in the face!  I recently got the Schiit Loki Max equalizer.  Turns out that it already has RCA and balanced input switching.  AND preset equalization profiles so I can optimize for the respective inputs.  And a remote that controls it all.  Ticket closed!  Cheers,

Can the ML 332 live with both inputs connected at once? 

This is unnecessary and there’s a much better and more elegant way to do this where the Denon is completely out of the signal path for 2-channel, which is what you want, and you switch between HT and stereo with the push of a button.  You simply run the front L/R preouts from the Denon to an unused RCA input on the Freya and the rest of your HT and stereo connections remain as normal (don’t bother converting the Denon’s RCA to XLR because you’ll still lose the balanced signal so there’s no point).  When you want stereo choose the appropriate balanced input on the Freya and when you want HT choose the input on the Freya the Denon is plugged into.  If the Freya has an HT bypass you’re done, but if not set the Freya’s volume control to 12:00 and set your HT individual volume settings as usual, and when you switch to HT turn the Freya’s volume to 12:00 and you’re good to go (just remember to turn the Freya’s volume down when switching back to stereo).  It’s simpler than it sounds, but many of us here have used this connection method with great success — best of both worlds really.  Hope this helps.