Can US 220 Volts Be Used On European 220 V Amp?


I am in the US and all my audio components run on the traditional voltage from a standard wall outlet. I am considering the purchase of a European amplifier that runs on 220 volts. If a US 220 Volt socket is added in my listening room, will the 220V European amp run properly on this US 220 voltage? Some thoughts I had is that the US 220V is 60 Hz, while (I think) the European 220V is 50 Hz.  I plugged in a volt meter into my wall outlet and it reads +/- 120 volts. Does that mean the the 2-pole voltage is 240 volts? Lots of questions and I don't want to damage the 220V European amp if I decide to buy it. Let me know your thoughts and experiences. Thanks in advance.

Ag insider logo xs@2x3zub

lou_setriodes

Changing from 50 to 60 Hz or vice versa will impact the speed of a cd player, cassette deck, reel to reel and a TT.

That's only strictly true with synchronous motors. Others, such as DD, may not be affected. However, they may have other issues if not designed to run at the supplied frequency, such as overheating.

If you have a turntable with a synchronous motor, you can safely use a drive controller such as the VPI ADS to alter the frequency and, hence, motor speed. I think Walker also makes a unit and there are probably others.

Seems it is not worthwhile to acquire an amp running 220V rated. Each of the options have their drawbacks.

Thanks to all for your replies.... hertz included. :)

@3zub 

Just curious, what 220 amp were you considering?

@cleeds 

someone told me of a cheaper workaround that works just fine.  I moved overseas 18 months ago, and this person told me he used this in Greece for several years with no issues.  Under his advice, I got a 220V power supply and a power inverter that’s used on boats and plugged the power inverter into the power supply.  Cost me all of $120 or so on Amazon and works like a charm.  All of the other devices to go from 60 to 50 Hz are all at least $500 which was almost as much as my Ariston TT.

lou_setriodes

I got a 220V power supply and a power inverter that’s used on boats and plugged the power inverter into the power supply .. works like a charm.

I wouldn't want an inverter near my system. I think it's better to use gear designed for the type of power it will run on, 120VAC/60hZ for most of us in the US.