@lowrider57 Thanks for the compliment on my system, I’ve certainly been all-in since COVID struck which coincided with my retirement and my wife’s death May she rest in peace.
Regarding the crossover, the speaker comes with two sets of speaker terminals, so that to drive them from a single amp, I would need strap the two positive terminals together and strap the two negative terminals together as well so that the power from the two wires could get to all four terminals and from there to all three drivers.
It is my understanding that each original set of speaker terminals were connected to their own crossover network, and the drivers receive their signal from the crossover network internal to each speaker, but external to the amplifier. I include a picture of the crossover networks in my virtual system photos. Both crossovers inhabit the same circuit board, so it is difficult to distinguish them.
I can definitely vouch for the fact that if I turn the one amp off driving the midrange and tweeter, all I hear is muffled bass notes, not at all distinct or loud; likewise, if I turn the amp feeding the bass drivers, all I hear is faint ‘tinny’ treble, again, not very distinct or loud. But when both amps are turned on I hear much more than the sun of the separate parts, the notes are clear, distinct, and loud, there is a sound stage (speakers disappear) instruments are well-placed within it, and there is plenty of ‘air’ around the instruments. As one listener noted, “I feel as if the musicians are in the room with me.” It is truly astonishing, and I didn’t have that kind of sound until I brought the B&W 801 speakers into the mix. They are truly a magnificent speaker: what you have (in the recording) is what you hear, no doubt.