Nordost Frey2 vs Tyr2


Those of you who have compared the Frey2 against the Tyr2 (and Heimdal2) speaker cables, what was the difference?

128x128swede58

My direct experience:

I had the NORDOST FREY V1 loom. my take:

- I didn’t see any clear performance improvement for an upgrade going to a TYR.
- However, a further model upgrade to VALHALLAs ..,, yep…. A different story. There is a reason why many exhibitors at audio expos choose either NORDOST VALHALLA / ODIN , or alternatively, CARDAS CLEAR / CLEAR BEYOND ..

 

OTHER 3rd PARTY COMMENTS

IN BRIEF

Q WHAT IS THE DIFFERENCE BETWEEN FREY V1 vs FREY V2?
A…negligible / indistinguishable to “meh?” ..with a perceived slant to the former.

- Mag Review:
https://www.soundstagehifi.com/index.php/equipment-reviews/690-nordost-frey-2-speaker-cables-interconnects-and-power-cables

“.. Compared to the original Frey speaker cables, the Frey 2s enjoy a 12% lower capacitance of 10.3 picofarads per foot -- according to Nordost, this increases the speed of the cable’s signal transmission while lowering signal loss….”

“ ,,, Conductors of 22x22 AWG are used in the V2 speaker cablesmote conductors , as compared to the V1 original wire’s 28x24 AWG.…”

User Forum Review;
Jun 2, 2015 #4

I have Nordost Frey 2m speaker cables. Last fall had the chance to change to the new Frey 2 that were a dealer demo for 400.00 also, 2m. I demo’d them for a few weeks and really could not tell much difference in my system, others also did not notice a difference so I kept the original Frey’s, ordered a few pizza’s, a nice bottle of scotch and some SACD’s with the 400.00. System is MSB Analog dac, Herron M1A, Verity Parsifal Encore and all the cabling except the speakers is Audience AU24 Se and power chord SE.”

 

alfa100. Well-Known Member Jun 6, 2015 #5
DavT New Member
“good to know newer does not necessarily translate to better”

 

 

@akg_ca Thanks. I fully understand that the Valhalla is a fantastic cable but it’s way to expensive. Twice the price of my Magnepan speakers!!!

@swede58

The Ag-over-Cu coated NORDOST FREYs were fine with my prior speakers, but when I moved to my current HARBETHs, they didn’t work like before . An irritating “brightness” and “digital edge” was now present …so . I’ve since moved up to an all-Cu CARDAS CLEAR full loom.to tame that irritating “edginess” and also added dynamics and slam.

my take :

- exercise caution on buying NORDOST blindly . . I would strongly recommend you first audition any of the HEIMDALL / FREY / TYR models ( NORSE 2 line ) first to see if you even like their bespoke sound and performance.

I’ve owned and auditioned the lower model LEIF models … I sold them and/or I passed on them ….. there are many better performing options out there at cheaper prices than these .

- Choose wisely…Ergo, stick with the NORSE2 or better VALHALLA model IMO if you are still married to NORDOST.

NOTE: I would also,strongly recommend that you change your ICs to matched NORDOST model - or better- to your proposed new NORDOST speaker cables choice …. There is a marked synergy uptick with both in the system.
In my experiences in my systems, one without the other left something lacking. FWIW ….