Yes, changing out a driver with a new replacement is a task most should be up to. Just pay attention to the wiring (taking a photo of the original may help) so you don't reverse phase.
As mentioned earlier, I'm not as familiar with DAL as Duntech models but I believe John not only tested individual drivers, he then tailored crossovers to match desired response for each speaker. I'm told Duntech keeps records of manufacturer so that a similar driver (spec-wise) can be supplied for replacement. I don't know if that practice was continued with DAL or not.
A few comments regarding set up if you do buy a pair. I believe use of spikes is room dependent and that relates to suspension VS solid floor, construction material, and floor coverings. Next, my Princess manual specified a 3 meter distance for listening to allow the five drivers to converge properly. A 10' equilateral triangle set up can work nicely. However, distance from sidewalls in important and should be a minimum of 3', more is better. Lastly I understand the DAL models may have been a bit easier to drive than similar Duntechs. My Princesses were rated at 90 dB but John suggested a minimum of 200 wpc "for musical enjoyment". ;^)
Good luck. I too believe all of Dunlavy's designs (Duntech and DAL) hold up very well and can offer great bargains in today's market.
As mentioned earlier, I'm not as familiar with DAL as Duntech models but I believe John not only tested individual drivers, he then tailored crossovers to match desired response for each speaker. I'm told Duntech keeps records of manufacturer so that a similar driver (spec-wise) can be supplied for replacement. I don't know if that practice was continued with DAL or not.
A few comments regarding set up if you do buy a pair. I believe use of spikes is room dependent and that relates to suspension VS solid floor, construction material, and floor coverings. Next, my Princess manual specified a 3 meter distance for listening to allow the five drivers to converge properly. A 10' equilateral triangle set up can work nicely. However, distance from sidewalls in important and should be a minimum of 3', more is better. Lastly I understand the DAL models may have been a bit easier to drive than similar Duntechs. My Princesses were rated at 90 dB but John suggested a minimum of 200 wpc "for musical enjoyment". ;^)
Good luck. I too believe all of Dunlavy's designs (Duntech and DAL) hold up very well and can offer great bargains in today's market.