300b lovers


I have been an owner of Don Sachs gear since he began, and he modified all my HK Citation gear before he came out with his own creations.  I bought a Willsenton 300b integrated amp and was smitten with the sound of it, inexpensive as it is.  Don told me that he was designing a 300b amp with the legendary Lynn Olson and lo and behold, I got one of his early pair of pre-production mono-blocks recently, driving Spatial Audio M5 Triode Masters.  

Now with a week on the amp, I am eager to say that these 300b amps are simply sensational, creating a sound that brings the musicians right into my listening room with a palpable presence.  They create the most open vidid presentation to the music -- they are neither warm nor cool, just uncannily true to the source of the music.  They replace his excellent Kootai KT88 which I was dubious about being bettered by anything, but these amps are just outstanding.  Don is nearing production of a successor to his highly regard DS2 preamp, which also will have a  unique circuitry to mate with his 300b monos via XLR connections.  Don explained the sonic benefits of this design and it went over my head, but clearly these designs are well though out.. my ears confirm it. 

I have been an audiophile for nearly 50 years having had a boatload of electronics during that time, but I personally have never heard such a realistic presentation to my music as I am hearing with these 300b monos in my system.  300b tubes lend themselves to realistic music reproduction as my Willsenton 300b integrated amps informed me, but Don's 300b amps are in a entirely different realm.  Of course, 300b amps favor efficient speakers so carefully component matching is paramount.

Don is working out a business arrangement to have his electronics built by an American audio firm so they will soon be more widely available to the public.  Don will be attending the Seattle Audio Show in June in the Spatial Audio room where the speakers will be driven by his 300b monos and his preamp, with digital conversion with the outstanding Lampizator Pacific tube DAC.  I will be there to hear what I expect to be an outstanding sonic presentation.  

To allay any questions about the cost of Don's 300b mono, I do not have an answer. 

 

 

whitestix

@alexberger 

your choice of 6sn7 as driving tube is not good (high output Z, low max plate current...)

Now, your choice 1 of implementation is the better one, only your concern is invalid.

High output Z does not automatically leads to narrow bandwidth.  Bad Interstage transformer causes it.  High Z tube can't drive 300B into deep A2 so you never get 8W  class A output from 300B that way. However, you can use Western electric's classic Ultra path design pattern, combining a CCS with a 0 DC current nickel 1:0.75 interstage transformer and achieve pretty good result if you bi-amp the speaker.

 

@alexberger The 6SN7 can support fairly high current which is why it can make a good driver tube if used properly. It can also make an excellent voltage amplifier (1st stage of gain) since it is quite linear if used correctly.

SETs usually do not need much gain since the speaker used with the amplifier should be high sensitivity (if a 300b power tube, +100dB is a good value). The 6SN7 will allow plenty of gain for this. One section can be used as the voltage amplifier and the other section the driver.

You should be able to get plenty of bandwidth using a 6SN7 and an interstage transformer! The issue will come down to the quality of the transformer itself.

 

I use 1/2 of 6sn7 in the input stage. The driver stage is the 6f6 tube drives the 300b though interstage transformer. The coupling between 6sn7 and 6f6 is RC with Vcup Cutf capacitors.

Ralph, I sincerely invite you to build your own 300B amplifier. (The name of the thread is "300B lovers", after all.) You’re smart enough to bring Allen Wright’s topology back to life, and give it unique improvements of your own. Seriously, if anyone can do that, it would be you, not me. The only way to explore the 300B sound is design your own amp around it, and I have no doubt it would turn out well. I think you would be quite pleased with the result.

Don, myself, and the Spatial team are developing the Raven/Karna/Blackbird architecture discussed in this thread, with really good suggestions from the whole team. Much appreciated, I can’t say that enough. You guys have taken it way beyond the 2003 thought experiment that Gary Pimm and I built.

What folks heard at the 2023 PAF show was a good preview of the full-on production model, which Don is charging ahead with as we speak. (Well, actually, I was just on the phone with Don, and he was at the beach, but tomorrow, OK?)

Alex Berger, what you have sounds fine to me. The only refinement would be separate power supplies for the input+driver and the output section. And maybe a dedicated filament transformer for the 300B, whether AC or DC powered.