"The way to go is actually good single amp matching speakers with good single wire. The rest is either joke or just toys.
Czarivey (System | Threads | Answers | This Thread)"
In many cases that will be true. But the results you get from bi wiring can vary quite a bit, going from system to system. Same thing is true with bi amping. But with bi amping, you have to be more careful. I find the only way that works properly is a vertical bi amp configuration. Horizontal poses too many problems, its not worth the trouble.
I just happen to have 2 pairs of speakers that are opposite of each other, in this regard. They make for a good example. In my main system, I have a pair of Vandersteen 2's. Bi wiring on those speakers is almost mandatory. (Keep in mind that Vandersteen was the one who came up with the concept originally, so it kind of makes sense that his speakers benefit the most) The difference that bi wiring provides is closer to a component upgrade, than a tweak. Its just one of those things that you need to hear, to believe it. And you don't need to use expensive cables either. I have 2 separate pairs of AQ CV-8, which are not too costly, as cables go. They easily beat a single run of Tara 2's that cost a lot more.
As far as vertical bi amping goes, I get a big improvement with a 2nd Ayre V-5, as opposed to just one. As always though, the amount of improvement (if any), will vary depending on many factors.
Comparing that to my 2nd system, its pretty much the opposite. I have Wilson Cubs and they don't even allow for bi amping or bi wiring of any kind. Wilson doesn't believe in the concept. Also, my Tara 2's sound a lot better than the CV-8. So in this case, the use of 1 pair of more expensive cables is easily justified.
Czarivey (System | Threads | Answers | This Thread)"
In many cases that will be true. But the results you get from bi wiring can vary quite a bit, going from system to system. Same thing is true with bi amping. But with bi amping, you have to be more careful. I find the only way that works properly is a vertical bi amp configuration. Horizontal poses too many problems, its not worth the trouble.
I just happen to have 2 pairs of speakers that are opposite of each other, in this regard. They make for a good example. In my main system, I have a pair of Vandersteen 2's. Bi wiring on those speakers is almost mandatory. (Keep in mind that Vandersteen was the one who came up with the concept originally, so it kind of makes sense that his speakers benefit the most) The difference that bi wiring provides is closer to a component upgrade, than a tweak. Its just one of those things that you need to hear, to believe it. And you don't need to use expensive cables either. I have 2 separate pairs of AQ CV-8, which are not too costly, as cables go. They easily beat a single run of Tara 2's that cost a lot more.
As far as vertical bi amping goes, I get a big improvement with a 2nd Ayre V-5, as opposed to just one. As always though, the amount of improvement (if any), will vary depending on many factors.
Comparing that to my 2nd system, its pretty much the opposite. I have Wilson Cubs and they don't even allow for bi amping or bi wiring of any kind. Wilson doesn't believe in the concept. Also, my Tara 2's sound a lot better than the CV-8. So in this case, the use of 1 pair of more expensive cables is easily justified.