Mirage M7si bass bump how to deal with it?/

You should be able to fix the problem, but with no info on your other components and the room, I don't see how anyone can make a worthwhile recommendation.

One basic thing I can suggest, is to make sure you're using the spiked feet. Sometimes, people just put them right on the floor and not use the spikes. If you have a hardwood floor, or something similar, you can still use them. Just put a penny under each spike.

Good advice above. Decouple them from the floor for starters, then play around with distance from the rear wall. You'll be amazed at the difference this makes. Start from three or more feet out (woofer to wall) which should tame the lower bass, then move them in incrementally until you like the sound. These appear to be very bass heavy speakers judging from the Stereophile measurements.

I must have not been very clear I did the usual things I worked in the audio biz and I know what to try and do. Spikes ,cables, gear. Solid core helps a little but then you lose other things. It is there no mater what One came tame it but not get rid of it. They HAVE a bass bump Look at the Stereophile review They tried to get rid of it, NO dice I am trying to think outside the box alittle
Newer Oval 9 wires Tried bi oval 12 WORSE AQ Midnight better but still there and lost other things ICs AP Old Copper Ovasl new Copper oval Solo Crystal
Gear Yamaha CR 2040 GREAT VINTAGE unit Sounds better then many seperates, marantz PM 17 MKII Marnatz PM 8003 Sony STR 7065 Rotel RB 990 and 995 (Better) but still there Rotel RA 1070 strange unit.

The problem even shows in the measurments

Hmmm. I'd just pass on them if you've tried everything. Sounds like the bass is a deal breaker. That graph was showing an 8db hump between 40 and 100 which is ridiculous in my opinion and suggests some bizarre design decisions. There are better speakers out there. Lots of them.