2. digital
  3. 1228927169

CD player connected directly to Amplifier?

I've been noticing some CD players which can be connected directly to the amp; in many models, its the recommended way to play them. I've never done this, but it seems like a good way to go assuming one has a nice high-end cd player equipped for such a task. I see the obvious advantage of foregoing the expense of a separate preamp, especially in a combined HT/2 channel rig like my own. Is there an obvious advantage in performance? Anyone have any thoughts or experience with this method?
michaeljbrown
jb0194
476 posts
 
I've a DAC w/volume control and mfr (dCS) recommends "direct to amp".

I very much prefer system sound interposing a nice tubed linestage.
sgunther
187 posts
 
I agree with Jb0194, a nice tube preamp improved the sound of my system.
stanwal's avatar
stanwal
3,147 posts
 
If the player was made to drive a power amp directly, not all are, then it should give the best sound in that mode. If it sounds better with a tube line stage then: 1, the output stage of the CD player was not of good quality or 2, you like the euphonic coloration the tubes add.
flashunlock
175 posts
 
IMO and from my own experiences in my own system, I always found adding a pre amp even though the CD player can drive power amps directly always gave much more in terms of layers, depth and a more realistic mid range. I have owned the Weiss combo, Esoteric, DCS stack and the Wadia 581-SE being the best out of the group in terms of digital volume section.
Using all of those players directly always sounded a bit thin, harsh and 2 dimensional in comparision.

Hope this helps.
eldartford
4,262 posts
 
A "digital" volume control does not have to be implemented by "throwing away bits". If you were to "throw away" a bit, and I guess that means left shift the data, the bit you would lose would be the least significant one, which, since you are listening at reduced volume is unlikely to be audible. But such a shift would give a 6dB volume reduction, so I doubt that such an approach is used.
More to discover