1/4'' ding / chip on a glossy black speaker

Try black auto touchup paint (usually in the little glass vial with a small brush). I've used this to touch up a black electric guitar ding and it can work. Use multiple coats and wet sand with small grit followed by some car wax to fine finish it.

"06-05-15: Wolf_garcia
Try black auto touchup paint (usually in the little glass vial with a small brush). I've used this to touch up a black electric guitar ding and it can work. Use multiple coats and wet sand with small grit followed by some car wax to fine finish it."

Something like that can work but you must know what kind of paint is on the speaker before you start. Its very common to come across different types of paint that won't work together.

Enamels and epoxy paints can be applied to any other type of
paint. Most enamels don't sand or rub out as nicely
though(too soft). Lacquers have more aggressive thinners that
will cause problems, if applied to other paint systems.
Power coat? LOL! Power coatings are electrostatically
applied(sprayed/surface has to conduct electricity) and then
baked, at almost 400 degrees(F). Unless your cabinet is
metal: forget about it!

"Power coat? LOL! Power coatings are electrostatically
applied(sprayed/surface has to conduct electricity) and then
baked, at almost 400 degrees(F). Unless your cabinet is
metal: forget about it! "

How do you know the OP doesn't have metal cabnets? My best friend had his Meridian 8000's fixed at a shop that did powder coating. I assume his speakers were metal; the Meridians that I had were.

I said this for a reason.

"Something like that can work but you must know what kind of paint is on the speaker before you start."

Like I said, "Unless your cabinet is metal: forget about it!" That DOES allow for the possibility of the OP's cabinet being metal. In that case; he would have to have the entire cabinet stripped(sand blasted), as powder coatings cannot be touched up. Chips in powder coating can be filled in with conventional paints, but- that never does look quite right.