Duelund conversion to DIY Helix Geometry Cabling


I have been an avid user of the Duelund cabling for over two years now and have used them exclusively in my system with great results. I have built many for friends and have used a full loom of interconnects, speaker cables, power cords and an extensive wiring modification for a previously owned balanced power conditioner utilizing Duelund 600V PolyCast wiring which was transformative. My cabling desires can be a little addictive as I have owned and evaluated 40+ brands of cabling costing more than an entire stereo system!

Over the past six months I stumbled upon a thread here on Audiogon in regards to a Helix designed cabling and as you probably already know, I just had to look a little deeper into this cable design…After a month of studying and sourcing parts, I decided to reach out to the designer/architect, Williewonka who gave more insights and philosophy on how the cable came into existence.

That conversation got the ball rolling in converting one of my KLE Duelund interconnects to Steve’s Helix designed which only entailed replacing the neutral with a Mil-Spec 16 AWG silver-plated copper wire with the neural wire being 3 times longer than the signal wire and of course the “Coiling” of the neutral wire : )

After the modification was complete, I was not sure what to expect from the Helix cabling but I was quite shocked with the results with “ZERO” burn-in time…The sound stage became much wider/deeper with a much tighter/focused image and clarity/transparency is like nothing I have ever heard in any cabling regardless of cost. In fact, I just sold a full loom of a commercially designed Helix Cable that’s renowned around the world and has more direct sale than any cable manufacturer; these $200 DIY Helix Cables walked all over them…

I believe you will hear the same results as I have and have heard back from friends who have already modified their Duelunds with the same results; WOW! Remember the cables will need 200+ hours to burn-in and settle into your system. My system is now 90% DIY Helix to include IC, SC, PC and Coax with each cabling adding its beauty of an organic and natural presentation that draws you into the fabric of the music.

You can tailor the sound of your cables using Duelund, Mundorf silver/1% gold, the outstanding Vh Audio OCC Solid Copper or Silver with Airlok Insulation or your favorite wiring and you can change it at any time…

 

http://www.image99.net/blog/files/category-diy-cables.html

https://forum.audiogon.com/discussions/difference-in-sound-between-copper-and-silver-digital-cables

https://forum.audiogon.com/discussions/adding-shielding-to-existing-cables

 

Enjoy,

Wig


128x128wig

@abolive, double signal wires for sure, but I found doubling the neutral on the single ended RCA cable only made a marginal improvement.

For me, the amount of improvement did not justify the additional effort, complexity and expence.

If you are intending to use a two wire signal conductor would make sure each signal wire is twisted in opposite directions and insert each conductor inside a cotton sleeve.

 

Is the budget allows use solid  occ silver

Regards, Steve

@williewonka, thanks. I have just enough TFA 14awg to make a 2.5 : 1 ratio helix. Would this be detrimental in any way?  Unfortunately I don't have the time to order more.

A year ago when I ordered from TFA the package took 5 weeks to arrive. It gets to Dublin in a few days then goes on a tour of the country. Things happen slowly in rural Ireland. Our street has no name but our cottage does, An Acra Beag, which is Gaelic for 'a small acre'  Stuff gets delayed.

 

@williewonka   Thank you very much,

Yes I was thinking of doubling only the signal wires.

When you say twisting in opposite directions, it means clockwise for the +ve and the anti-clockwise pour the -ve?

 

 

@lemonhaze - actually, that ratio is what is posted on my website.👍

If required you could reduce it to 2:1, because unlike interconnects, where the signal and any induced noise would be amplified, making that noise an issue, whereas any induced rfi/emi induced into the speaker cable would not be heard above the amplified signal from the Amp, so the number of turns is not as important.

So, interconnects a ratio of 3.1 is recommended

And for speaker cables 2.5:1 is recommended

Regards