Sagging power plugs in wall outlet, diy

I guess your pics got removed.  I am building a few!  Thanks!  

Shunyata makes just what you are looking for, "The Cable Cradle Wall Outlet.

I used free Chinese to-go chopsticks. Cut 1 to 3 inches long and super glue it on top of a long one as a T shape…voa-la.

I guess your pics got removed. I am building a few! Thanks!

@fastfreight

If you are referring to the pictures I posted maybe the manufacturer asked Admin to take them down. I did copy their plate. ???

If you are going to build some like the one I made and are going to use a Miter Saw to make the three cuts to the repair coupling I used a blade made to cut plastic and PVC. I already had the blade.

FYI, I used a 24" piece of PVC pipe to hold the coupling when making the cuts. Safety first. My Miter Saw has a 12" blade. A lot of damage to fingers and hands with any rotating blade.

Do not use super glue. For a another test I doubled the downward pressure force on the cup and the glue failed. I did push down pretty hard, but... I would try a clear 2 part epoxy made for plastic and PVC. the duplex plate is only around 40 cents. Start out making just one to make sure the epoxy holds.

.

Thanks again!  Can you describe the three cuts?  Did you split them into half circles, then take the small amount off the cut edge to keep the outer edge smooth?  Ken