Please unplug your Mola Mola Kaluga amp from all electrical power, wait a full 5 minutes. Plug it back and see if this works. If not, I suggest you call your retailer. If not possible, send another email to Mola Mola. Call them if possible.
A better solution is to call:
Distributors USA AND CANADA
GTT Audio
av@gttaudio.com
More suggestions:
Based on the search results provided, the Mola Mola Kaluga amplifier does have audio output, but there may be some troubleshooting steps required if the user is experiencing no output:
1. Verify the mains connection and check the fuse. If the power cable works with another device but the Kaluga does not power on, the fuse may need to be replaced.[1]
2. Check that the input switch on the Kaluga is set correctly to RCA or XLR, and verify the speaker wiring is connected properly between the positive and negative terminals.[1]
3. Inspect the speaker cables for any shorts or issues that could be causing distortion or interruptions in the sound.[1]
4. Ensure the Kaluga is not in standby mode - the power LED should be lit white when the amp is on.[1]
5. If the 12V trigger input is being used, check that it is properly connected and that the trigger is activating the Kaluga as expected.[1]
If the user has followed these troubleshooting steps and is still experiencing no output, the Kaluga may require service or repair. The manual advises contacting the local retailer if the unit is not functioning as expected.[1]
[1] Kaluga Power Amplifier User's Manual