Should I connect my OPPO BDP 105 to my PontisII?

I connected the OPPO to the Pontus, but all I get is a constant "clicking" sound.  Thought it might be a faulty cable, so tried another.  Same thing.  Any ideas of what would cause this????

What output are you using from the Oppo?  The HDMI output is for A/V only and doesn’t work for i2S if that’s what you’re using. 

I used the SPDiF out.  (Optical).  I do have the HDMI cable running to my TV.  Would that cause a problem?  If so, how to connect the OPPO to the TV optimally? 

Well, first I wouldn’t use an optical cable for to the Pontus as you’re introducing additional conversions to and from light transmission and it’s limited to 24/96.  Check the settings in the Oppo to make sure the digital outs are active and properly configured, and you also may want to try a 1m wire SPDIF digital cable in case the optical connection on either side is compromised (a regular analog RCA interconnect may work for this too just for trial purposes).  Here’s a decent cable that’s not too pricey if you need one, and you can easily return it if it doesn’t work…

https://www.amazon.com/Geistnotes-Apogee-Wyde-Cable-WE-RR/dp/B01N29180M/ref=sr_1_1?crid=RBCMHOO0RK3W&dib=eyJ2IjoiMSJ9.BaI3PBEjKIocRjAsFYUFL87J2dPa9D_7Bf5HPi1GRxuXOcDjEvJtFBXBwae46wQS.XdUyeEpPfIdiQ-3B13GSh513lUYCIQoL1kJuoYG4md4&dib_tag=se&keywords=apogee%2Bwyde%2Beye%2Bcable&qid=1712844475&sprefix=Apogee%2Bwyde%2Caps%2C147&sr=8-1&th=1

Good luck!