2. speakers
  3. 190534-166623

speakers and cables

this is about me being a loser and problem creator.

I finally got a 2nd subwoofer and I was excited to hook it up. Well, not too excited. I knew it would be a pain to hook it up. I was excited to hear it. I spent over 90 minutes connecting the speaker wires to my power amp. When I turned it on, the left channel was gone. It blew the fuse. I disconnected everything, replaced the fuse, hooked it up again. It worked for 10 seconds, blew the fuse again.

The way I hooked them up was I went from the sub speaker out from both subwoofers, rolled the left and right side wires together so I had 4 wires that I connected to the left and right plus and minus channels - speaker binders on the power amp. What are my options? My preamp has no sub out. Nor my amp.

Stupid question: should I just go from left to left on one sub and right to right on the other sub?

grislybutter
immatthewj
1,783 posts
 

Grizzly, even though I know what you said and I respect that and I understand, since a pic is theoretically worth a lot of words, here is what my high pass looks like. I am only posting this as it may clarify my explanation. And A’gon may not let it be posted . . . I’ve never had a lot of luck posting links here.

https://www.ebay.com/itm/116023312749

cliffkhz
48 posts
 

Pic # 2

dill
2,509 posts
 

To post a clickable link: On the toolbar just to the right of the emoji click the chain link, put the link in the URL window. If you want to name the link, put the name in the Display Text box then click ok.

https://www.ebay.com/itm/116023312749

immatthewj
1,783 posts
 

high pass filter

immatthewj
1,783 posts
 

It worked!! Thanks, @dill !!! I am diagnoseably computer illiterate, but now, thanks to you, a tad bit less. That’s the second thing I’ve learned in the last ten minutes!

On edit:  that is transformational!

More to discover